Related papers: Compressive performance and crack propagation in A…
We present a model for the thermally activated propagation of cracks in elastic matrices. The propagation is considered as a subcritical phenomenon, the kinetics of which being described by an Arrhenius law. In this law, we take the thermal…
We investigate numerically the dynamics of crack propagation along a weak plane using a model consisting of fibers connecting a soft and a hard clamp. This bottom-up model has previously been shown to contain the competition of two crack…
Additive manufacture and rapid prototyping are versatile methods for the generation of lattice materials for applications in the creep regime. However, these techniques introduce defects that can degrade the macro-scopic creep strength. In…
The maximum recoverable strain of most crystalline solids is less than 1% because plastic deformation or fracture usually occurs at a small strain. In this work, we show that a SrNi$_2$P$_2$ micropillar exhibits pseudoelasticity with a…
We grow AlN/4H-SiC and AlN/6H-SiC heterostructures by physical vapor deposition and characterize the heterointerface with nanoscale resolution. Furthermore, we investigate the spatial stress and strain distribution in these heterostructures…
Fused filament fabrication (FFF) is widely used to obtain polymer-based composites with improved mechanical and thermal conduction properties. The effective properties of the composites are sensitive to its structure including the shape,…
An extensive diffusion analysis is presented for binary Ni-X and ternary Ni-Al-X (X = Cr, Mo, Ta, W, Re) systems, which play a crucial role in microstructural evolution and phase stability in Ni-Al-based superalloys. Specifically, we…
The CrMnFeCoNi high-entropy alloy is highly printable and holds great potential for structural applications. However, no significant discussions on cyclic plasticity and fatigue damage in previous studies. This study provides significant…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
The (secondary) electron emission from multilayered Al$_2$O$_3$/TiN membranes has been investigated with a hemispherical collector system in a scanning electron microscope for electrons with energies between 0.3 and 10 keV. These ultra-thin…
The possibility of tailoring the critical strain of 2D materials will be crucial for the fabrication of flexible devices. In this paper, the fracture in polycrystalline MoS2 films with two different grain orientations is studied at the…
The failure of adhesive bondlines has been studied at the microscopic level via tensile tests. Stable crack propagation could be generated by means of samples with improved geometry, which made in-situ observations possible. The interaction…
This paper investigates the effects of plasticity on the effective fracture toughness. A layered material is considered as a modelling system. An elastic-plastic phase-field model and a surfing boundary condition are used to study how the…
The influence of different types of precipitates (either Guinier-Preston zones, $\theta''$ or $\theta'$) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al - 4 wt. \%…
New generation concentrated solar power (CSP) plants require new solar receiver materials with selective optical properties and excellent corrosion resistance against molten salts. MAX phases are promising materials for CSP applications due…
Refractory metals exhibit high strength at high temperature, but often lack ductility. Multiprinciple element alloys such as high entropy alloys offer the potential to improve ductility while maintaining strength, but we don't know…
Manufactured metallic components often contain non-uniformly distributed pores of complex morphologies. Since such porosity defects have significant influence on material behaviors and affect the usage in high-performance applications, it…
The softening and strengthening contributions in pre-deformed and aged Al-Mg-Cu alloys containing 3wt.%Mg and 0.5wt.%Cu are evaluated by a combination of microscopy, mechanical testing and modelling. A refined phenomenological model for the…
(Abridged abstract) Alloyed MgB2 differs from pure forms in that diffusion is needed to distribute the alloying elements homogeneously. Williamson-Hall analyses of x-ray diffraction peaks showed that Mg1-xAlxB2 samples made by a typical…
Additive manufacturing (AM) could be a novel method of fabricating composite and porous materials having various effective performances based on mechanisms of their internal geometries. Materials fabricated by AM could rapidly be used in…