Related papers: Compressive performance and crack propagation in A…
The effect of crystallography on transgranular chloride-induced stress corrosion cracking (TGCISCC) of arc welded 304L austenitic stainless steel is studied on >300 grains along crack paths. Schmid and Taylor factor mismatches across grain…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
High-pressure X-ray diffraction experiments were performed on Ti-Al-V alloys to investigate the effect of composition on structural stability, focusing on Ti-3Al-2.5V and comparing with pure Titanium and Ti-6Al-4V. Measurements using…
We investigate crack propagation in a simple two-dimensional visco-elastic model and find a scaling regime in the relation between the propagation velocity and energy release rate or fracture energy, together with lower and upper bounds of…
The influence on macroscopic work hardening of small, spherical, elastic particles dispersed within a matrix is studied using an isotropic strain gradient plasticity framework. An analytical solution, based on a recently developed yield…
A new class of crack-resistant nickel-based superalloy containing high $\gamma^\prime$ fraction is studied for the laser-powder bed fusion (L-PBF) process. The effects of the (Nb+Ta)/Al ratio is emphasised, a strategy that is shown to…
In view of their immensely intriguing properties, two dimensional materials are being intensely researched in search of novel phenomena and diverse application interests, however, studies on the realization of nanocomposites in the…
A theoretical study of Mo2TiAlC2 compound belonging to the MAX phases has been performed by using the firstprinciples pseudopotential plane-wave method within the generalized gradient approximation. We have calculated the structural,…
Numerical simulations of Aluminum (Al) and Tungsten (W) granular composite rings under various dynamic loading conditions caused by explosive loading were examined. Three competing mechanisms of fragmentation were observed: a continuum…
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the…
We demonstrate a method to induce tensile and compressive strain into two-dimensional transition metal dichalcogenide (TMDC) MoS$_{2}$ via the deposition of stressed thin films to encapsulate exfoliated flakes. With this technique we can…
We investigate the role of architected thin films in the interfacial failure properties of bi-layer composites. Our results show that, while graded structures can be used to prescribe failure at the interface, they do not offer significant…
For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high…
High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such…
Ni-based structural alloys in molten salt environments often experience simultaneous mechanical loading and corrosive attack, yet the mechanisms governing stress-corrosion interactions remain unclear. Prior studies largely emphasize tensile…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
We use classical molecular dynamics (MD) simulations to investigate the mechanical properties of pre-cracked, nano-porous single layer MoS2 (SLMoS2) and the effect of interactions between cracks and pores. We found that the failure of…
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging…
From nanoscale devices including sensors, electronics, or biocompatible coatings to macroscale structural, automotive or aerospace components, fundamental understanding of plasticity and fracture can guide the realization of materials that…
This study analyses literature data to identify optimised print parameters and assesses the consolidation, microstructure, and mechanical properties of Hastelloy-X printed by laser powder bed fusion. Effects of post annealing and…