Related papers: Screening Current-Induced Field and Field Drift St…
HTS are feasible for hight power applications because of the smaller consumption demand of the cooling system in comparison to the whole power device. Real industral devices contain superconductors with 2D and 3D geometry (coated conductors…
The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents…
High-temperature superconducting (HTS) magnetic mirrors under development exploit strong fields with high mirror ratio to compress loss cones and enhance confinement, and may offer cheaper, more compact fusion power plant candidates. This…
Use of 2G HTS coated conductors in several power applications has become popular in recent years. Their large current density under high magnetic fields makes them suitable candidates for high power capacity applications such as stacks,…
Field decay rate is the key characteristic of the superconducting magnets based on closed-loop coils. However, in Maglev trains or rotating machines, closed-loop magnets work in external AC fields and will exhibit an evidently accelerated…
The high-Tc superconducting (HTS) dynamo is a promising device that can inject large DC supercurrents into a closed superconducting circuit. This is particularly attractive to energise HTS coils in NMR/MRI magnets and superconducting…
Besides screening-current-induced magnetic fields (SCIF), the shielding effect in high-Tc coated conductors also has an strong influence on its strain distribution in a coil winding, especially during high-field operations. To demonstrate…
Critical current density Jc in polycrystalline or granular superconducting material is known to be hysteretic with applied field H due to the focusing of field within the boundary between adjacent grains. This is of concern in the so-called…
Undulators are X-ray sources that are widely utilised in advanced synchrotron radiation sources and freeelectron laser facilities. Due to sustainability and energy efficiency, the development focuses on small-scale, high-field, and…
We present a set of experimental results concerning the power spectrum of current noise, detected on a granular high Tc superconductor submitted either to a slowly varying magnetic field or to a varying current intensity. Experiments were…
When monitoring machine learning systems, two-sample tests of homogeneity form the foundation upon which existing approaches to drift detection build. They are used to test for evidence that the distribution underlying recent deployment…
Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique…
Quantitative magneto-optical imaging of a type-II superconductor thin film cooled under zero, homogeneous, and inhomogeneous applied magnetic fields, indicates that the latter procedure leads to an enhancement of the screening capacity.…
In this work we present a modeling tool designed to estimate the hysteretic losses in the coils of an electric generator with coils made of coated conductor tapes during transient operation. The model is based on a two-stage segregated…
The high-$T_c$ superconducting (HTS) dynamo exploits the nonlinear resistivity of an HTS tape to generate a DC voltage when subjected to a varying magnetic field. This leads to the so-called flux pumping phenomenon and enables the injection…
Parallel-wound no-insulation (PW-NI) high-temperature superconducting (HTS) coils significantly reduce charging delay while maintaining excellent self-protection capability, demonstrating great potential for high-field applications.…
A backward computation method has been developed to accelerate modelling of the critical state magnetization current in a staggered-array bulk high-temperature superconducting (HTS) undulator. The key concept is as follows: i) a large…
The determination of the critical current density from magnetic hysteresis loops is widely used to characterize and compare superconducting samples. Magnetic hysteresis loops for tapes and single crystals depend on both the critical current…
High-temperature superconductors (HTS) are finding use as high - current wires for potential application in power devices. The dependence of their basal-plane critical current properties on orientation in a magnetic field can pose important…
Striating HTS coated conductor (CC) tapes into narrow filaments offers the possibility of reducing the tapes' magnetization losses without unreasonably decreasing their current-carrying capability. However, realizing well-separated…