Related papers: Grip-Aware Analog mmWave Beam Codebook Adaptation …
At millimeter wave (mmW) frequencies, beamforming and large antenna arrays are an essential requirement to combat the high path loss for mmW communication. Moreover, at these frequencies, very large bandwidths are available to fulfill the…
Beam codebooks are integral components of the future millimeter wave (mmWave) multiple input multiple output (MIMO) system to relax the reliance on the instantaneous channel state information (CSI). The design of these codebooks, therefore,…
Millimeter-wave communications rely on narrow-beam transmissions to cope with the strong signal attenuation at these frequencies, thus demanding precise alignment between transmitter and receiver. However, the beam-alignment procedure may…
Gbps wireless transmission over long distance at high frequency bands has great potential for 5G and beyond, as long as high beamforming gain could be delivered at affordable cost to combat the severe path loss. With limited number of RF…
Beamforming-capable antenna arrays with many elements enable higher data rates in next generation 5G and 6G networks. In current practice, analog beamforming uses a codebook of pre-configured beams with each of them radiating towards a…
Since the spectrum below 6 GHz bands is insufficient to meet the high bandwidth requirements of 5G use cases, 5G networks expand their operation to mmWave bands. However, operation at these bands has to cope with a high penetration loss and…
Millimeter wave (mmWave) communication with large array gains is a key ingredient of next generation (5G) wireless networks. Effective communication in mmWaves usually depends on the knowledge of the channel. We refer to the problem of…
In 5G cellular networks, frequency range 2 (FR2) introduces higher frequencies that cause rapid signal degradation and challenge user mobility. In recent studies, a conditional handover procedure has been adopted as an enhancement to…
Penetration of cellphones into markets requires their robust operation in time-varying radio environments, especially for millimeter-wave communications. Hands and fingers of a human cause significant changes in the physical environments of…
Beamforming technology is widely used in millimeter wave systems to combat path losses, and beamformers are usually selected from a predefined codebook. Unfortunately, the traditional codebook design neglects the beam squint effect, and…
Higher frequencies that are introduced in 5G networks cause rapid signal degradation and challenge user mobility. In recent studies, a conditional handover procedure has been adopted for 5G networks to enhance user mobility robustness. In…
This paper studies the cross-layer challenges and performance of Hybrid Beamforming (HBF) and Multi-User Multiple-Input Multiple-Output (MU-MIMO) in 5G millimeter wave (mmWave) cellular networks with full-stack TCP/IP traffic and MAC…
The fifth generation (5G) of mobile communications relies on extremely high data transmission rates utilizing a wide range of frequency bands, including FR1 (sub-6 GHz) and FR2 (mmWave). Future mobile communications systems are envisaged to…
Millimeter wave (mmWave) cellular systems will enable gigabit-per-second data rates thanks to the large bandwidth available at mmWave frequencies. To realize sufficient link margin, mmWave systems will employ directional beamforming with…
This paper explores the design of beamforming codebooks for the base station (BS) and for the reconfigurable intelligent surfaces (RISs) in an active sensing scheme for uplink localization, in which the mobile user transmits a sequence of…
The millimeter wave (mmWave) communication uses directional antennas. Hence, achieving fine alignment of transmit and receive beams at the initial access phase is quite challenging and time-consuming. In this paper, we provide a…
For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array…
The millimeter wave (mmWave) bands and other high frequencies above 6~GHz have emerged as a central component of Fifth-Generation (5G) cellular standards to deliver high data rates and ultra-low latency. A key challenge in these bands is…
We propose a hybrid architecture that integrates RF (i.e., sub-6 GHz) and millimeter wave (mmWave) technologies for 5G cellular systems. In particular, communications in the mmWave band faces significant challenges due to variable channels,…
Antenna arrays will be an important ingredient in millimeter wave (mmWave) cellular systems. A natural application of antenna arrays is simultaneous transmission to multiple users. Unfortunately, the hardware constraints in mmWave systems…