Related papers: Oxygen-based digital etching of AlGaN/GaN structur…
In this paper we report a novel ohmic contact formation scheme for Extreme Bandgap (EBG) AlxGa1-xN (x>0.6) channel HEMTs with undoped barrier layers. Our approach consists of using a new low temperature (LT) pulsed metal-organic chemical…
The high frequency performance and yield of III-V semiconductor devices such as InP HEMTs is negatively impacted by subsurface etch damage and non-uniform etch depth over the wafer. Atomic layer etching (ALE) has the potential to overcome…
We report the isotropic plasma atomic layer etching (ALE) of aluminum nitride using sequential exposures of SF$_6$ plasma and trimethylaluminum (Al(CH$_3$)$_3$, TMA). ALE was observed at temperatures greater than 200 $^\circ$C, with a…
We report on the demonstration of a deep sub-micron normally-off AlGaN/GaN HEMT with high on-current and high threshold voltage (VTH). The high-performance device was realized by utilizing a gate recess with length and depth of 200 nm and…
A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+ Si and Si0.7Ge0.3 using the combinations of HNO3 oxidation and BOE oxide removal processes were studied.…
In this work, we demonstrate a passivation-free Ga-polar recessed-gate AlGaN/GaN HEMT on a sapphire substrate for W-band operation, featuring a 5.5 nm Al0.35Ga0.65N barrier under the gate and a 31 nm Al0.35Ga0.65N barrier in the gate access…
High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…
A dual-channel AlN/GaN high electron mobility transistor (HEMT) architecture is demonstrated that leverages ultra-thin epitaxial layers to suppress surface-state related gate lag. Two high-density two-dimensional electron gas (2DEG)…
We report a two-step process to obtain smooth and vertical {10-10} m-plane facets in AlGaN/GaN separate confinement heterostructures designed to fabricate UV lasers emitting at 355 nm. The process consists in a dry etching by RIE-ICP…
Ultrathin GaN nanowires (NWs) are attractive to maximize surface effects and as building block in high-frequency transistors. Here, we introduce a facile route for the top-down fabrication of ordered arrays of GaN NWs with aspect ratios…
We report a polarization-induced 2D electron gas (2DEG) at an epitaxial AlBN/GaN heterojunction grown on a SiC substrate. Using this 2DEG in a long conducting channel, we realize ultra-thin barrier AlBN/GaN high electron mobility…
Ultra-wide bandgap (UWBG) materials hold immense potential for high-power RF electronics and deep ultraviolet photonics. Among these, AlGaN emerges as a promising candidate, offering a tunable bandgap from 3.4 eV (GaN) to 6.1 eV (AlN) and…
We reported on the observation of extremely high-density ($>10^{14}$cm$^{-2}$) 2D electron gas in N-polar AlGaN/GaN heterostructures grown on sapphire substrates. Due to introducing the GaN/AlN superlattice (SL) back barrier between the GaN…
In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the…
In this paper, we present a Pt/Al multilayer stack-based ohmic contact metallization for AlGaN/GaN heterostructures. CTLM structures were fabricated to assess the electrical properties of the proposed metallization. The fabricated stack…
We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures…
We report on our investigation of the electrical properties of metal/Al2O3/GaN metal-insulator-semiconductor (MIS) capacitors. We determined the conduction band offset and interface charge density of the alumina/GaN interface by analyzing…
In this article, high composition (>35%) thick (>30 nm) barrier AlGaN/AlN/GaN HEMT structure grown on a sapphire substrate with ultra-low sheet resistivity (<250 \Omega / \Box ) is reported. Optimization of growth conditions, such as…
We investigate the influence of AlN buffer thickness on the structural, electrical, and thermal properties of AlGaN/GaN high-electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates by metal-organic chemical vapor…
We present an inductively coupled-plasma reactive-ion etching process that simultaneously provides both a high etch rate and unprecedented selectivity for gallium phosphide (GaP) in the presence of aluminum gallium phosphide…