Related papers: Imaging over an unlimited bandwidth with a single …
Metasurface optics have demonstrated vast potential for implementing traditional optical components in an ultra-compact and lightweight form factor. Metasurface lenses, also called metalenses, however, suffer from severe chromatic…
Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However,…
We demonstrate visible and near-IR image projection via non-absorbing, multi-level Broadband Diffractive-Optical Elements (BDOEs) in 1 or more planes. By appropriate design of the BDOE topography, we experimentally demonstrate: (1)…
Optical beamforming networks (OBFNs) based on optical true time delay lines (OTTDLs) are well-known as the promising candidate to solve the bandwidth limitation of traditional electronic phased array antennas (PAAs) due to beam squinting.…
Direct imaging of exoplanets requires very high contrast levels, which are obtained using coronagraphs. But residual quasi-static aberrations create speckles in the focal plane downstream of the coronagraph which mask the planet. This…
Over the last two decades, spatial light modulators (SLMs) have revolutionised our ability to shape optical fields. They grant independent dynamic control over thousands of degrees-of-freedom within a single light beam. In this work we test…
Microscopes and various forms of interferometers have been used for decades in optical metrology of objects that are typically larger than the wavelength of light {\lambda}. However, metrology of subwavelength objects was deemed impossible…
Metalenses have shown great promise in their ability to function as ultracompact optical systems for focusing and imaging. Remarkably, several designs have been recently demonstrated that operate over a large range of frequencies with…
Focal plane wavefront sensing techniques are generally limited to using imaging systems that have below 1% spectral bandwidths, due to the radial smearing of speckles from chromatic diffraction that causes optical image magnification over…
We present a method to calibrate a high-resolution wavefront-correcting device with a single, static camera, located in the focal plane; no moving of any component is needed. The method is based on a localized diversity and differential…
Wide-angle optical functionality is crucial for implementation of advanced imaging and image projection devices. Conventionally, wide-angle operation is attained by complicated assembly of multiple optical elements. Recent advances in…
Speckle photography can be used to monitor deformations of solid surfaces. The measuring characteristics, such as range or lateral resolution depend heavily on the optical recording and illumination set-up. This paper shows how, by the…
In recent years, mode-division multiplexing (MDM) has been proposed as a promising solution in order to increase the information capacity of optical networks both in free-space and in optical fiber transmission. Here we present the design,…
Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale…
Bandwidth smearing is a chromatic aberration due to the finite frequency bandwidth. In long-baseline optical interferometry terms, it is when the angular extension of the source is greater than the coherence length of the interferogram. As…
Reflecting light to a pre-determined non-specular direction is an important ability of metasurfaces, which is the basis for a wide range of applications (e.g., beam steering/splitting and imaging). However, anomalous reflection with 100%…
We propose a scheme for imaging periodic surfaces using a superlens. By employing an inverse scattering model and the transformed field expansion method, we derive an approximate reconstruction formula for the surface profile, assuming…
Multispectral imaging has been used for numerous applications in e.g., environmental monitoring, aerospace, defense, and biomedicine. Here, we present a diffractive optical network-based multispectral imaging system trained using deep…
Two key metrics for imaging systems are their magnification and optical bandwidth. While high-quality imaging systems today achieve bandwidths spanning the whole visible spectrum and large changes in magnification via optical zoom, these…
Structural coloration is commonly modeled using wave optics for reliable and photorealistic rendering of natural, quasi-periodic and complex nanostructures. Such models often rely on dense, preliminary or preprocessed data to accurately…