Related papers: Parametrically Amplified Low-Power MEMS Capacitive…
We present a SNAIL-based parametric amplifier that integrates a lumped-element impedance matching network for increased bandwidth and an on-chip pump-port filter for efficient pump delivery. The amplifier is fabricated using a single-layer…
The characteristic studies of a Single Mask~(SM) triple Gas Electron Multiplier (GEM) detector are carried out using Ar/CO$_2$ gas mixture in 70/30 volume ratio in continuous flow mode. A Fe$^{55}$ X-ray source is used for this work. The…
Effective water management is essential for the optimal performance of PEM fuel cells. We have developed an impedance model for liquid water transport through the membrane and coupled it with the two-phase model for cathode side impedance.…
Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of…
A new type of integrated temperature and humidity sensor applying LTCC-technology has been developed and characterized. In this approach, sensing elements are implemented using heated metal resistors (Pt-elements), where one is exposed to…
A high-sensitivity thermal sensing is demonstrated by coating a layer of polydimethylsiloxane (PDMS) on the surface of a silica toroidal microresonator on a silicon wafer. Possessing high-Q whispering gallery modes (WGMs), the PDMS-coated…
The advancement of Micro Pattern Gaseous Detector technology offers us different kinds of detectors with good spatial resolution and high rate capability and the Gas Electron Multiplier (GEM) detector is one of them. Typically GEM is made…
Low-noise amplifiers are of great importance in the field of quantum technologies. We study a thermally driven parametric amplifier based on a superconductor-insulator-graphene-insulator-superconductor (SIGIS) junction coupled to a…
Stretching response of polymer chains under external force is crucial in understanding polymer dynamics under equilibrium and non-equilibrium conditions. Here we measure the elastic response of poly(ethylene glycol) using a lock-in based…
We present the first study of parametric amplification in hydrogenated amorphous silicon waveguides. Broadband on/off amplification up to 26.5~dB at telecom wavelength is reported. Measured nonlinear parameter is 770~$\textrm{W}^{-1}…
A novel readout architecture that uses multiple non-destructive floating-gate amplifiers to achieve sub-electron readout noise in a thick, fully-depleted silicon detector is presented. This Multi-Amplifier Sensing Charge-Coupled Device…
We demonstrate humidity sensing using a change of electrical resistance of a single- layer chemical vapor deposited (CVD) graphene that is placed on top of a SiO2 layer on a Si wafer. To investigate the selectivity of the sensor towards the…
Predictable circuit response is a critical prerequisite for accurate electronic measurements. We describe a powerful, yet straightforward, experimental method and analysis model that utilizes an affordable LCR meter in conjunction with an…
GEM are widely used as amplification stages in gaseous detectors exposed to high rates. The GEM consists of a polyimide foil which is coated by two thin copper layers. Charges collected into the holes or created during the amplification…
To realize nanomechanical graphene-based pressure and gas sensors, it is beneficial to have a method to electrically readout the static displacement of a suspended graphene membrane. Capacitive readout, typical in micro-electro-mechanical…
A hallmark of mechanical resonators made from a single nanotube is that the resonance frequency can be widely tuned. Here, we take advantage of this property to realize parametric amplification and self-oscillation. The gain of the…
Capacitive technology allows building sensors that are small, compact and have high sensitivity. For this reason it has been widely adopted in robotics. In a previous work we presented a compliant skin system based on capacitive technology…
The gain, received power bandwidth, transient characteristics, and signal fidelity of two time-varying electrically small antennas based on parametric amplifier design are studied using practical QAM signals. Results show that interference…
We have previously reported on the construction and successful operation of the novel double phase Liquid Argon Large Electron Multiplier Time Projection Chamber (LAr LEM-TPC). This detector concept provides a 3D-tracking and calorimetric…
The development of room-temperature sensing devices for detecting small concentrations of molecular species is imperative for a wide range of low-power sensor applications. We demonstrate a room-temperature, highly sensitive, selective, and…