Related papers: Surface states in AlGaN/GaN high electron mobility…
A dual-channel AlN/GaN/AlN/GaN high electron mobility transistor (HEMT) architecture is proposed, simulated, and demonstrated that suppresses gate lag due to surface-originated trapped charge. Dual two-dimensional electron gas (2DEG)…
High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…
We report on the potential of high electron mobility transistors (HEMTs) consisting of high composition AlGaN channel and barrier layers for power switching applications. Detailed 2D simulations show that threshold voltages in excess of 3 V…
The characterization of deep levels in AlGaN/GaN heterostructures is one of the most important problems in GaN high electron mobility transistors (HEMTs) technology. This work reports on a technique for determination of deep level…
We report on the direct measurement of two-dimensional sheet charge density dependence of electron transport in AlGaN/GaN high electron mobility transistors. Pulsed IV measurements established increasing electron velocities with decreasing…
This paper presents an analysis of GaN high-electron-mobility transistors (HEMTs) using both TCAD simulation and experimental characterization. The energy band structure was studied using Nextnano simulation software to observe…
We investigate the influence of AlN buffer thickness on the structural, electrical, and thermal properties of AlGaN/GaN high-electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates by metal-organic chemical vapor…
Galliumnitride has become a strategic superior material for space, defense and civil applications, primarily for power amplification at RF and mm-wave frequencies. For AlGaN/GaN high electron mobility transistors (HEMT), an outstanding…
A dual-channel AlN/GaN high electron mobility transistor (HEMT) architecture is demonstrated that leverages ultra-thin epitaxial layers to suppress surface-state related gate lag. Two high-density two-dimensional electron gas (2DEG)…
In this paper, physics-based analytical models using two-dimensional (2D) Poisson equations for surface potential, channel potential, electric field, and drain current in AlN/$\beta$-Ga$_2$O$_3$ high electron mobility transistor (HEMT) is…
Mechanical transfer of high performing thin film devices onto arbitrary substrates represents an exciting opportunity to improve device performance, explore non-traditional manufacturing approaches, and paves the way for soft, conformal,…
GaN high electron mobility transistors (HEMT) have gained some foothold in the power electronics industry due to wide frequency bandwidth and power handling. The material offers a wide bandgap and higher critical field strength compared to…
A technically simple and physically clear method is suggested for the direct measurement of brightness temperature of two-dimensional electron gas (2DEG) in the channel of a high electron mobility transistor (HEMT). The usage of the method…
We have developed a simulation system for nanoscale high-electron mobility transistors, in which the self-consistent solution of Poisson and Schr\"odinger equations is obtained with the finite element method. We solve the exact set of…
We present a magneto-optical study of the three-dimensional topological insulator, strained HgTe using a technique which capitalizes on advantages of time-domain spectroscopy to amplify the signal from the surface states. This measurement…
Despite considerable advancements, high electron mobility transistors (HEMTs) based on gallium nitride (GaN) channels remain largely limited to power applications below 650 V. For higher power demands, the ultra-wide bandgap semiconductor…
We present a comprehensive investigation of self-heating in gallium nitride (GaN) high-electron-mobility transistors (HEMTs) through technology computer-aided design (TCAD) simulations and phonon Monte Carlo (MC) simulations. With…
Modern bandgap engineered electronic devices are typically made of multi-semiconductor multi-layer heterostructures that pose a major challenge to silicon-era characterization methods. As a result, contemporary bandgap engineering relies…
We report N-polar AlN-based high-electron mobility transistors (HEMTs) with a GaN channel thickness of 5.2 nm on N-polar AlN on sapphire. The threshold voltage is around -2.4 to -3.0 V with saturation currents over 240 mA/mm and on/off…
The thermal stability and structural evolution of a GaN high-electron-mobility transistor (HEMT) heterostructure grown on a Si (111) substrate were investigated using in situ high-temperature X-ray diffraction (HT-XRD), reciprocal space…