Related papers: Novel High Efficiency Quadruple Junction Solar Cel…
The InAs/InGaAs DWELL solar cell grown by MBE is a standard pin diode structure with six layers of InAs QDs embedded in InGaAs quantum wells placed within a 200-nm intrinsic GaAs region. The GaAs control wafer consists of the same pin…
Two-terminal tandem cell architectures are believed to be an effective way to further improve the power conversion efficiency in solution processed photovoltaics. To design an efficient tandem solar cell, two key issues need to be…
III-V materials show a wide range of gaps making them ideal for the design of high efficiency solar cells. This chapter reviews relevant growth methods and material properties of these materials and discusses methods of combining…
While silicon solar cells dominate global photovoltaic energy production, their continued improvement is hindered by the single junction limit. One potential solution is to use molecular singlet exciton fission to generate two electrons…
Recent technical and commercial successes of existing thin film solar cell technologies motivates exploration of next-generation photovoltaic (PV) absorber materials. Of particular scientific interest are compounds like CuSbSe$_2$, which do…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…
A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest…
Solar photons possessing energy less than the band-gap of a single-junction solar cell can be utilized via the up-conversion (UC) of two or more photons, resulting in the emission of a single above-bandgap photon. Due to the non-linear…
Photovoltaic (PV) cells have become one of the most promising renewable energy technologies. To make PV more competitive with incumbent technologies, higher power output densities are needed. One promising approach is to add bifaciality to…
The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency…
Thin-film solar cells reach high efficiencies and have a low carbon footprint in production. Tandem solar cells have the potential to significantly increase the efficiency of this technology, where the bottom-cell is generally composed of a…
III-V solar cells dominate the high efficiency charts, but with significantly higher cost than other solar cells. Ultrathin III-V solar cells can exhibit lower production costs and immunity to short carrier diffusion lengths caused by…
In this study, we designed and optimized the performance of pin junction GaAs/AlGaAs heterojunction nanowire solar cell arrays. It is done by performing coupled optoelectronic simulations to find the optimal doping for the GaAs core and…
Surface recombination affects both light-to-electricity and electricity-to-light conversion in solar cells (SCs). Therefore, quantitative analysis and reduction of surface recombination is an important direction in SC research. In this…
The advanced multijunction solar cell (MJSC) has emerged as a frontrunner in photovoltaic literature due to its superior photoconversion efficiency (PCE) owing to its complex fabrication procedure and high costs. This article aims to…
Multi-junction photovoltaics provide a logical method of increasing the utilization of solar power for a given area. However, their current design and fabrication methods invoke numerous material and cost complexities that limit their…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
Hybridization of multi-junction concentrator photovoltaics with single-junction flat plate solar cells (CPV/PV) can deliver the highest power output per module area of any PV technology. Conversion efficiencies up to 34.2% have been…
It is currently possible to fabricate crystalline silicon solar cells with the absorber thickness ranging from a few hundreds of micrometers (conventional wafer-based cells) to devices as thin as $1\,\mu\mathrm{m}$. In this work, we use a…
Photovoltaic solar cell is one of the main renewable energy sources, and its power conversion efficiency (PCE) is improved by employing doping or heterojunction to reduce the photogenerated carrier recombination. Here, we propose a…