Related papers: Adhesive contact of model randomly rough rubber su…
A macroscopically nominal flat surface is rough at the nanoscale level and consists of nanoasperities. Therefore, the frictional properties of the macroscale-level rough surface are determined by the mechanical behaviors of nanoasperity…
We consider an adhesive contact between a thin soft layer on a rigid substrate and a rigid cylindrical indenter ("line contact") with account of the surface tension of the layer. First, it is shown that the boundary condition for the…
We report on an experimental investigation of the interplay between friction, contact geometry and finite strains for smooth frictional contacts between rigid spherical glass probes and flat silicone substrates. Using both bulk and layered…
We have employed a numerical procedure to analyze the adhesive contact between a soft elastic layer and a rough rigid substrate. The solution of the problem is obtained by calculating the Green's function which links the pressure…
Experimental results for adhesive contacts on substrates coated with elastomeric thin films have recently been obtained by C. Tardivat and L. L\'{e}ger (J. Adhesion Sci. Technol. 15 1055-1078 (2001)) by the so-called JKR test, which…
The old asperity model of Fuller and Tabor had demonstrated almost 50 years ago surprisingly good correlation with respect to quite a few experiments on the pull-off decay due to roughness of rubber spheres against roughened Perspex plates.…
Finite element methods are used to study non-adhesive, frictionless contact between elastic solids with self-affine surfaces. We find that the total contact area rises linearly with load at small loads. The mean pressure in the contact…
In order to develop predictive wear laws, relevant material parameters and their influence on the wear rate need to be identified. Despite decades of research, there is no agreement on the mathematical form of wear equations and even the…
When two solids are squeezed together they will in general not make atomic contact everywhere within the nominal (or apparent) contact area. This fact has huge practical implications and must be considered in many technological…
Recently, it has been shown that while asperity models show correctly qualitative features of rough contact problems (linearity in area-load, negative exponential dependence of load on separation which means also linearity of stiffness with…
This paper advances an analytical incremental contact model for the purely elastic or elastic-perfectly plastic Gaussian rough surfaces. The contact is modelled by the accumulation of identical circular contacts with radius given by the…
The most direct measurement of adhesion is the pull-off force, i.e. the tensile force necessary to separate two solids in contact. For a given interface, it depends on various experimental parameters, including separation speed, contact age…
We study the adhesive contact between elastic solids with randomly rough, self affine fractal surfaces. We present molecular dynamics (MD) simulation results for the interfacial stress distribution and the wall-wall separation. We compare…
We develop two new continuum contact models for coupled adhesion and friction, and discuss them in the context of existing models proposed in the literature. Our new models are able to describe sliding friction even under tensile normal…
We present an experimental investigation of the non stationary frictional properties of multicontact interfaces between rough elastomers and rough hard glass at low velocities (<= 200 mu m s^{-1}). These systems, for which the deformation…
The effect of surface curvature on the law relating frictional forces F with normal load L is investigated by molecular dynamics simulations as a function of surface symmetry, adhesion, and contamination. Curved, non-adhering, dry,…
We report on the multi-contact frictional dynamics of model elastomer surfaces rubbed against bare glass slides. The surfaces consist of layers patterned with thousands spherical caps (radius of curvature 100 $\mu$m) distributed both…
Engineering wear models are generally empirical and lack connections to the physical processes of debris generation at the nanoscale to microscale. Here, we thus analyze wear particle formation for sliding interfaces in dry contact with…
High-frequency micrometrical vibrations have been shown to greatly influence the adhesive performance of soft interfaces, however a detailed comparison between theoretical predictions and experimental results is still missing. Here, the…
Contact between an elastic manifold and a rigid substrate with a self-affine fractal surface is reinvestigated with Green's function molecular dynamics. Stress and contact autocorrelation functions (ACFs) are found to decrease…