Related papers: Mode I crack tip fields: strain gradient plasticit…
In this work, distortion gradient plasticity is used to gain insight into material deformation ahead of a crack tip. This also constitutes the first fracture mechanics analysis of gradient plasticity theories adopting Nye's tensor as primal…
The shear strength of a pre-cracked sandwich layer is predicted, assuming that the layer is linear elastic or elastic-plastic, with yielding characterized by either J2 plasticity theory or by a strip-yield model. The substrates are elastic…
Crack advance from short or long pre-cracks is predicted by the progressive failure of a cohesive zone in a strain gradient, elasto-plastic solid. The presence of strain gradients leads to the existence of an elastic zone at the tip of a…
The crack tip mechanics of strain gradient plasticity solids is investigated analytically and numerically. A first-order mechanism-based strain gradient (MSG) plasticity theory based on Taylor's dislocation model is adopted and implemented…
The fracture toughness for a mode I/II crack propagating in a ductile material has been subject to numerous investigations. However, the influence of the material hardening law has received very limited attention, with isotropic hardening…
In this paper, we study the preferential stiffness and the crack-tip fields for an elastic porous solid of which material properties are dependent upon the density. Such a description is necessary to describe the failure that can be caused…
This work models brittle fracture using a linearized surface-substrate theory in which the crack faces possess surface stresses derived from a surface strain-gradient elastic energy. The model incorporates surface stretching, curvature, and…
In this study, we use the mechanism-based strain gradient plasticity theory to evaluate both crack tip dislocation density behaviour and the coupled effect of the material plastic properties and the intrinsic material length on non-linear…
A mathematical model for crack-tip fields is proposed in this paper for the response of a three-dimensional (3-D) porous elastic solid whose material moduli are dependent on the density. Such a description wherein the generalized Lam\`e…
This paper introduces a three-dimensional (3-D) mathematical and computational framework for the characterization of crack-tip fields in star-shaped cracks within porous elastic solids. A core emphasis of this model is its direct…
The interaction of crack fronts with asperities is central to the criteria of fracture in heterogeneous materials and for predicting fracture surface formation. It is known how dynamic crack fronts respond to small, 1st-order,…
Despite extensive theoretical treatment of short- to long-crack transitions, direct experimental quantification of how elastic and plastic energy contributions evolve at the crack tip during arrest has remained absent. In this study, we…
Finite element analysis of stress about a blunt crack tip, emphasizing finite strain and phenomenological and mechanism-based strain gradient plasticity (SGP) formulations, is integrated with electrochemical assessment of occluded-crack tip…
Crack-tip fields within a transversely isotropic strain-limiting elastic body are investigated under the influence of piecewise linear slope boundary loads. The mechanical response is characterized via a nonlinear constitutive framework…
This paper presents a comprehensive computational framework for investigating thermo-elastic fracture in transversely isotropic materials, where classical linear elasticity fails to predict physically realistic behavior near stress…
This paper presents a finite element model for the analysis of crack-tip fields in a transversely isotropic strain-limiting elastic body. A nonlinear constitutive relationship between stress and linearized strain characterizes the material…
In this work a general framework for damage and fracture assessment including the effect of strain gradients is provided. Both mechanism-based and phenomenological strain gradient plasticity (SGP) theories are implemented numerically using…
An assessment is made of the J-integral test procedure for initial crack growth in an open-cell aluminium alloy foam by combining finite element (FE) simulations with experiment. It is found experimentally that a zone of randomly failed…
The evolution of a crack front under mixed mode loading (I+III) is studied using a phase field model in 3 dimensions with no stress boundary conditions. As previously observed experimentally in gels, there is a relaxation toward a geometry…
When brittle hydrogels fail, several mechanisms conspire to alter the state of stress near the tip of a crack, and it is challenging to identify which mechanism is dominant. In the fracture of brittle solids, a sufficient far-field stress…