Related papers: On the effect of Re addition on microstructural ev…
Increasing attention is being paid to $\alpha$$_2$ Ti$_3$(Al,Sn) precipitation from the $\alpha$ phase of titanium alloys owing to its effect on slip band formation, localisation and the implications for fatigue performance in jet engine…
Single crystals of Mg1-xAlxB2 have been grown at a pressure of 30 kbar using the cubic anvil technique. Precipitation free crystals with x < 0.1 were obtained as a result of optimization of already developed MgB2 crystal growth procedure.…
The influence of Ca and Y on the microstructure and corrosion resistance of vacuum die casting AZ91 alloy is investigated using optical microscope, electron scanning microscope, weight-loss test and electrochemical corrosion test. The…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
We present a comprehensive study relating the nanostructure of Ge_0.95Mn_0.05 films to their magnetic properties. The formation of ferromagnetic nanometer sized inclusions in a defect free Ge matrix fabricated by low temperature molecular…
Al-Mg-Si alloys are utilized in large scale electrical conduction applications thanks to their low density, high strength, and low electrical resistivity. The alloying elements, Mg and Si, are introduced to improve the mechanical strength;…
The effect of silica nanoparticles on transient microemulsion networks made of microemulsion droplets and telechelic copolymer molecules in water is studied, as a function of droplet size and concentration, amount of copolymer, and…
This study investigates the interfacial tension, fluid mobility, and crystallization behavior of various saline and additive-modified solutions in a microfluidic chip environment, simulating pore-scale processes during CO2 injection. The…
Gibbs-Thompson effect is the general term referring to the influence of interfaces on the course of phase transformations such as precipitation or solidification. Whilst attention is most often focused on the Gibbs-Thomson effect on…
The service lives of nickel superalloys are often limited by environmental degradation. The present study compares oxidation, sulfidation and hot corrosion at 750C of three variants of a polycrystalline superalloy: a baseline alloy, a…
The potential impact of cation-substituted AlN-based materials, such as Al1-xScxN, Al1-xGaxN, and Al1-xBxN, with exceptional electronic, electromechanical, and dielectric properties has spurred research into this broad family of materials.…
The physical property characterization of Al doped Mg1-xAlxB2 system with x = 0.0 to 0.50 is reported. The results related to phase formation, structural transition, resistivity R(T) and magnetization M(T) measurements are discussed in…
The occurrence of stable decagonal quasicrystalline phase in Al-Co-Ni and Al-Cu-Co alloys through conventional solidification is well established. Earlier, we have studied the effect of Cu substitution in place of Co in the Al70 Co15Ni15…
Titanium is commonly added to nickel superalloys but has a well-documented detrimental effect on oxidation resistance. The present work constitutes the first atomistic-scale quantitative measurements of grain boundary and bulk compositions…
Effective post-heat treatment is critical to achieve desired microstructure for high-performance in additively manufactured (AM) components. In this work, the influence of homogenization on microstructure-property relationship in 17-4PH…
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $\gamma/\gamma'$ phase microstructure co-evolves…
The effects of ageing at 800 $^\circ$C on the properties of the IRIS alloy (Ti$_{49.9}$Al$_{48}$W$_2$B$_{0.1}$) are studied. The initial microstructure of this alloy densified by Spark Plasma Sintering (SPS) is mainly composed of lamellar…
The complexity and richness of phenomena governing alloy crystal growth can be unraveled by examining the three-dimensional atomic-level distribution of elements and impurities incorporated during growth. These species act as atomic…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
The present work investigates the atomic interactions among Cu, Al, and Ni elements in bcc-iron matrix, focusing on the formation mechanism of nano-sized core-shell Cu precipitates. Using a combination of atom probe tomography (APT),…