Related papers: Meeting the Scaling Challenge for Post-Silicon Nan…
The bandgap dependence on the number of atomic layers of some families of 2D-materials, can be exploited to engineer and use lateral heterostructures (LHs) as high-performance Field-Effect Transistors (FET). This option can provide very…
Future electronics require aggressive scaling of channel material thickness while maintaining device performance. Two-dimensional (2D) semiconductors are promising candidates, but despite over two decades of research, experimental…
Metals are commonly used as electrostatic gates in devices due to their abundant charge carrier densities that are necessary for efficient charging and discharging. A semiconducting gate can be beneficial for certain fabrication processes,…
Monolayer Molybdenum disulfide (MoS2), a two-dimensional crystal with a direct bandgap, is a promising candidate for 2D nanoelectronic devices complementing graphene. There have been recent attempts to produce MoS2 layers via chemical and…
Despite the enormous progress achieved during the past decade, nanoelectronic devices based on two-dimensional (2D) semiconductors still suffer from a limited electrical stability. This limited stability has been shown to result from the…
Multiferroic van der Waals (vdW) heterostrucutres offers an exciting route towards novel nanoelectronics and spintronics device technology. Here we investigate the electronic and transport properties of multiferroic vdW heterostructure…
Crystalline two-dimensional (2D) semiconductors often combine high elasticity and in-plane strength, making them ideal for strain-induced tuning of electronic characteristics, akin to strategies used in silicon electronics. However,…
Two-dimensional (2D) semimetals beyond graphene have been relatively unexplored in the atomically-thin limit. Here we introduce a facile growth mechanism for semimetallic WTe2 crystals, then fabricate few-layer test structures while…
Solution processed field-effect transistors based on single crystalline silicon nanowires (Si NWs) with metal Schottky contacts are demonstrated. The semiconducting layer was deposited from a nanowire ink formulation at room temperature.…
Ultrathin two-dimensional semiconductors obtained from layered transition-metal dichalcogenides such as molybdenum disulfide (MoS2) are promising for ultimately scaled transistors beyond Si. Although the shortening of the semiconductor…
The successful detection of biomolecules by a Field Effect Transistor-based biosensor (BioFET) is dictated by the sensor's intrinsic Signal-to-Noise Ratio (SNR). The detection limit of a traditional BioFET is fundamentally limited by…
Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities.…
The advent of two-dimensional van der Waals materials is a frontier of condensed matter physics and quantum devices. However, characterizing such materials remains challenging due to the limitations of bulk material techniques,…
Non-van der Waals two-dimensional (2D) materials derived from strongly bonded non-layered crystals have recently emerged as a novel and rising platform for nanoscale research. While uncovering and tuning their (opto-)electronic, catalytic,…
Recently, we proposed a novel transistor architecture for 3D stacked FETs called Flip FET (FFET), featuring N/P transistors back-to-back stacked and dual-sided interconnects. With dual-sided power rails and signal tracks, FFET can achieve…
Starting from graphene, 2D layered materials family has been recently set up more than 100 different materials with variety of different class of materials such as semiconductors, metals, semimetals, superconductors. Among these materials,…
Monolayer WSe2 is a two dimensional (2D) semiconductor with a direct bandgap, and it has been recently explored as a promising material for electronics and optoelectronics. Low field effect mobility is the main constraint preventing WSe2…
Two-dimensional (2D) molybdenum disulfide (MoS2) holds great promise in electronic and optoelectronic applications owing to its unique structure and intriguing properties. The intrinsic defects such as sulfur vacancies (SVs) of MoS2…
Ultra-thin (UT) oxide semiconductors are promising candidates for back-end-of-line (BEOL) compatible transistors and monolithic three-dimensional integration. Experimentally, UT indium oxide (In$_2$O$_3$) field-effect transistors (FETs)…
While decreasing the oxide thickness in carbon nanotube field-effect transistors (CNFETs) improves the turn-on behavior, we demonstrate that this also requires scaling the range of the drain voltage. This scaling is needed to avoid an…