Related papers: Finding pathways for stoichiometric Co4N thin film…
A detailed study of the influence of molecular beam epitaxial growth conditions on the structural and magnetic characteristics of CuMnSb films on lattice matched GaSb is presented. For a set of nine 40~nm thick layers, the Mn and Sb fluxes…
Magnetocaloric properties of an inhomogeneous magnetic system of a 7.6 nm La${}_{0.7}$Sr${}_{0.3}$MnO${}_{3}$ consisting of superparamagnetic (SPM) with blocking temperature ( $T_B$ = 240 K) and ferromagnetic (FM) phases ( $T_C$ = 290 K) is…
Epitaxial hcp Cobalt films with pronounced c-axis texture have been prepared by pulsed lased deposition (PLD) either directly onto Al2O3 (0001) single crystal substrates or with an intermediate Ruthenium buffer layer. The crystal structure…
We have used Raman spectroscopy to study indium nitride thin films grown by molecular beam epitaxy on (111) silicon substrates at temperatures between 450 and 550 C. The Raman spectra show well defined peaks at 443, 475, 491, and 591…
The double perovskite Sr2CrReO6 is an interesting material for spintronics, showing ferrimagnetism up to 635 K with a predicted high spin polarization of about 86%. We fabricated Sr2CrReO6 epitaxial films by pulsed laser deposition on…
Low-temperature epitaxial growth of refractory transition-metal nitride thin films by means of physical vapor deposition has been a recurring theme in advanced thin-film technology for several years. In the present study, 150-nm-thick…
Using pulsed laser deposition and a unique fast quenching method, we have prepared SrCoOx epitaxial films on SiTiO3 substrates. As electrochemical oxidation increases the oxygen content from x = 2.75 to 3.0, the films tend to favor the…
The local epitaxial growth of pulsed laser deposited Ca$_2$MnO$_4$ films on polycrystalline spark plasma sintered Sr$_2$TiO$_4$ substrates was investigated to determine phase formation and preferred epitaxial orientation relationships…
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…
Magnetite thin fims have been grown epitaxially on ZnO and MgO substrates using molecular beam epitaxy. The film quality was found to be strongly dependent on the oxygen partial pressure during growth. Structural, electronic, and magnetic…
By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…
Superconducting and epitaxially grown LaFeAsOF thin films were successfully prepared on (001)-oriented LaAlO3 substrates using pulsed laser deposition. The prepared thin films show exclusively a single in-plane orientation with epitaxial…
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 deg C wide. The deposition…
The suitability of a particular material for use in magnetic devices is determined by the process of magnetization reversal/relaxation, which in turn depends on the magnetic anisotropy. Therefore, designing new ways to control magnetic…
Properties of complex oxide thin films can be tuned over a range of values as a function of mismatch, composition, orientation, and structure. Here, we report a strategy for growing structured epitaxial thermoelectric thin films leading to…
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film…
A new fabrication process is developed for growing Bi2Se3 topological insulators in the form of nanowires/nanobelts and ultra-thin films. It consists of two consecutive procedures: first Bi2Se3 nanowires/nanobelts are deposited by standard…
The structural, magnetic and dielectric properties have been investigated in 3$d$-5$d$ based double perovskite Sr$_2$FeIrO$_6$ thin films deposited by pulse laser deposition technique. To understand the effect of strain, epitaxial films are…
Two-dimensional materials have attracted growing interest due to their unique electronic properties and potential applications in spintronics. Interfacing strongly spin-orbit-coupled chalcogenides with functional oxides such as perovskites…