Related papers: Measuring thickness in thin NbN films for supercon…
Scaling superconducting digital circuits requires fundamental changes in the current material set and fabrication process. The transition to 300 mm wafers and the implementation of advanced lithography are instrumental in facilitating…
A simple method was developed to observe the interference patterns of the light reflected by the interfaces of thin liquid films. Employing a fluorescent microscope with epi-illumination, we collected the 2D patterns of interference fringes…
In-situ monitoring and calibration of nano-sculptured thin film thickness is a critical problem due to substrate tilt angle dependent porosity and mass flux. In this letter we present an analytical model for thickness dependence on…
We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to…
We present wideband microwave measurements (1-22 GHz) taken on Superconductor/Ferromagnet heterostructures with the Corbino disk technique. We apply the technique to Nb/PdNi/Nb trilayers in the vortex state and we compare the results to…
We present an approach to increase the effective light-receiving area of superconducting nanowire single-photon detectors (SNSPD) by means of free-form microlenses that are printed in situ on top of the sensitive detector area using…
Growth monitoring during the early stages of film formation is of prime importance to understand the growth process, the microstructure and thus the overall layer properties. In this work, we demonstrate that phonons can be used as…
We demonstrate and characterize first superconducting nanowire single-photon detectors (SNSPDs) made from atomic layer-deposited (ALD) NbN layers. To assess the suitability of these films as a detector material, transport properties of bare…
A novel broad-band measurement method of the MI in thin films and ribbons is presented. It is based on the automated measurement of the reflection coefficient of a cell loaded with the sample. Illustrative results obtained with a permalloy…
Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ~100 nm. Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons.…
Thin Film technology has widespread applications in everyday electronics, notably Liquid Crystal Display screens, solar cells, and organic light emitting diodes. We explore the potential of this technology as charged particle radiation…
Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as entails the degree of reproducibility necessary for large-scale of superconducting circuits. We demonstrate that resonators based on NbN thin…
Atomic-level imperfections play an increasingly critical role in nanophotonic device performance. However, it remains challenging to accurately characterize the sidewall roughness with sub-nanometer resolution and directly correlate this…
We propose using THz frequency selective surfaces interrogated with THz subwavelength optical fibers as sensors for monitoring of the optical properties of thick films that are brought in contact with such surfaces. Changes in the test film…
A new approach was proposed to accurately determine the thickness of film, especially for ultra-thin film, through spectrum fitting with the assistance of interference layer. The determination limit can reach even less than 1 nm. Its…
Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane…
We present a practical white-light interferometric method, supported by an open-source Python library \textit{optifik} for automated spectrum-to-thickness deduction, enabling foam film measurements down to a few nanometers. We describe…
Using mm-wave transmission we obtain information about both the real and imaginary part of the dielectric function of superconducting thin films. This is done by fitting the Fabry-Perot resonance spectrum for the film plus substrate over a…
Accessing fluid infiltration in nanogranular coatings is an outstanding challenge, of relevance for applications ranging from nanomedicine to catalysis. A sensing platform, allowing to quantify the amount of fluid infiltrated in a…
Electrons levitating above the surface of solid neon have recently emerged as a promising platform for high-quality qubits. The morphology and uniformity of the neon growth in these systems is crucial for qubit performance in a scalable…