Related papers: Tailoring Interdigitated Back Contacts for High-pe…
Silicon heterojunction (SHJ) solar cells with an interdigitated back-contact (IBC) exhibit high conversion efficiencies of up to 25.6%. However, due to the sophisticated back-side pattern of the doped layers and electrode structure many…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
The power conversion efficiency of the market-dominating silicon photovoltaics approaches its theoretical limit. Bifacial solar operation with harvesting additional light impinging on the module back and the perovskite/silicon tandem device…
There have been sustained interest in bifacial solar cell technology since 1980s, with prospects of 30-50% increase in the output power from a stand-alone single panel. Moreover, a vertical bifacial panel reduces dust accumulation and…
With the rapidly growing interest in bifacial photovoltaics (PV), a worldwide map of their potential performance can help assess and accelerate the global deployment of this emerging technology. However, the existing literature only…
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large…
As single junction thin-film technologies, both Si heterojunction (HIT) and Perovskite based solar cells promise high efficiencies at low cost. One expects that a tandem cell design with these cells connected in series will improve the…
Bulk heterojunction (BHJ) organic solar cells have made remarkable inroads towards 20% efficiency, yet nonradiative recombination losses ({\Delta}Vnr) remain high compared to silicon and perovskite photovoltaics. Interfaces buried within…
Practical device architectures are proposed here for the implementation of three-terminal heterojunction bipolar transistor solar cells (3T-HBTSCs). These photovoltaic devices, which have a potential efficiency similar to that of…
Hybridization of multi-junction concentrator photovoltaics with single-junction flat plate solar cells (CPV/PV) can deliver the highest power output per module area of any PV technology. Conversion efficiencies up to 34.2% have been…
Single junction Si solar cells dominate photovoltaics but are close to their efficiency limits. This paper presents ideal limiting efficiencies for tandem and triple junction multijunction solar cells subject only to the constraint of the…
We propose a new triple-junction solar cell structure composed of a III-V heterojunction bipolar transistor solar cell (HBTSC) stacked on top of, and series-connected to, a Si solar cell (III-V-HBTSC-on-Si). The HBTSC is a novel…
There are recent investigations regarding tandem solar cells with a top perovskite cell and a bottom silicon one with a potential of > 25% power conversion efficiency. Because of still high production costs of silicon cells it is believed…
Photovoltaic cells (PVc), as an energy provider to the next generation and the biggest source of renewable energy. Since the last decade improving efficiency and reducing the cost of PVc has been a subject of active research among…
A high photon to electricity conversion efficiency of 47.2082% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a quadruple junction solar cell design. The electronic bandgap of…
This paper reports on the investigation of the electronic properties of a thin film CdS/CdTe solar cell with the Ion Beam Induced Charge (IBIC) technique. The device under test is a thin film (total thickness around 10 um) multilayer…
In organic bulk heterojunction solar cells, the donor/acceptor interfacial energy offset ($\Delta E$) is found to provide the driving force for efficient charge separation which gives rise to high short circuit current density…
The bifacial gain of East-West vertical and South-facing optimally-tilted bifacial farms are well established. One wonders if bifacial gain (and the associated LCOE) may be further improved by tracking the sun. Tracking bifacial PV has…
Despite the promising optoelectronic properties of methylammonium lead iodide (MAPbI3)-based perovskite solar cells (PSCs), their commercial viability is hindered by interfacial energy misalignment, suboptimal light absorption, and thermal…