Related papers: First demonstration of temperature control enabled…
The possibility of using an optocoupler "pulsed fiber laser - photo thyristor" as a switch in excitation circuits of copper vapor lasers (CVL) is investigated. It is shown that such switch has a nanosecond speed, is able to pass monopolar…
Numerical simulations of heat transport in diamond anvil cells reveal a possibility for absolute measurements of specific heat via high-frequency modulation calorimetry. Such experiments could reveal and help characterize temperature-driven…
In optical detection setups to measure the deflection of micro-cantilevers, part of the sensing light is absorbed, heating the mechanical probe. We present experimental evidences of a frequency shift of the resonant modes of a cantilever…
A nonlocal energy-balance equation is derived for the optical absorption, photoluminescence and inelastic electron-phonon scattering, which determines the electron and hole temperatures for any given lattice temperature. The evolution of…
The development of a transportable microwave frequency standard based on the ground-state transition of $^{171}\mathrm{Yb^{+}}$ at ~12.6 GHz requires a compact laser system for cooling the ions, clearing out of long-lived states and also…
We present an experimental setup to laser cool and trap a large number of Ytterbium atoms. Our design uses an oven with an array of microtubes for efficient collimation of the atomic beam and we implement a magneto-optical trap of…
Due to the necessity of making a series of random adjustments after mode-locking in most experiments for preparing soliton molecules, the repeatability of the preparations remains a challenge. Here, we introduce a novel…
The methodology for a heterodyned laser-induced transient thermal grating technique for non-contact, non-destructive measurements of thermal transport in opaque material is presented. Phase-controlled heterodyne detection allows us to…
A prerequisite for laser cooling a molecular anion, which has not been achieved so far, is the precise knowledge of the relevant transition frequencies in the cooling scheme. To determine these frequencies we present a versatile method that…
Ultrafast lasers have unlocked numerous advances across science and technology: they enable corneal surgery, reveal chemical reaction dynamics, and underpin optical atomic clocks. Over the past decades, extensive efforts have been devoted…
A microfabricated phase Fresnel lens was used to image ytterbium ions trapped in a radio frequency Paul trap. The ions were laser cooled close to the Doppler limit on the 369.5 nm transition, reducing the ion motion so that each ion formed…
A high temperature superconducting detector was fabricated to capture the thermal images in room temperature background. The detector was made of YBa2Cu3O7-{\delta} (YBCO) superconducting thin film deposited on an Yttria Stabilized Zirconia…
We propose an energy transfer model with a cubic atomic population dependence to accurately model the behavior of various reported high-power erbium-doped fluoride fiber lasers operating near 2.8 microns. We first show that the previously…
A compact and robust laser system, based on a frequency-doubled telecom laser, providing all the lasers needed for a rubidium cold atom interferometer using optical lattices is presented. Thanks to an optical switch at 1.5 \mu m and a…
We report on the sub-Doppler laser cooling of neutral $^{171}$Yb and $^{173}$Yb in a magneto-optical trap using the $^{1}S_{0}$-$^{1}P_{1}$ transition at 398.9nm. We use two independent means to estimate the temperature of the atomic cloud…
Doppler and Sisyphus cooling of $^{174}$YbOH are achieved and studied. This polyatomic molecule has high sensitivity to physics beyond the Standard Model and represents a new class of species for future high-precision probes of new…
We demonstrate a 1.4 W continuous wavelength (CW) laser at 243.1 nm. The radiation is generated through frequency quadrupling the output of a ytterbium-doped fiber amplifier system which produces $>$ 10 W of CW power at 972.5 nm. We…
An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam…
We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz…
A novel mode-locked fiber laser based on offset splicing technology between two kinds of graded index multimode fibers is proposed and experimentally demonstrated. The offset splice spot structure acts as a saturable absorber via nonlinear…