Related papers: First demonstration of temperature control enabled…
This paper shows a novel method to precisely measure the laser power using an optomechanical system. By measuring a mirror displacement caused by the reflection of an amplitude modulated laser beam, the number of photons in the incident…
We propose a laser cooling mechanism that leads to a temperature significantly lower than the single-photon recoil limit, about $4\times 10^{-4}\,E_{r}$. This mechanism benefits from sharp and high-contrast spectra which are induced by…
We report three orders of magnitude optical cooling of the fundamental torsional mode of a 5 mm-long, 550 nm diameter optical nanofiber. The rotation of the nanofiber couples to the polarization of guided laser fields. We use a weak laser…
We consider a two-color formaldehyde PLIF thermometry scheme using a wavelength-switching injection seeding Nd:YAG laser at 355 nm. The 28183.5 cm-1 and 28184.5 cm-1 peaks of formaldehyde are used to measure low temperature combustion zone.…
When heated, micro-resonators present a shift of their resonance frequencies. We study specifically silicon cantilevers heated locally by laser absorption, and evaluate theoretically and experimentally their temperature profile and its…
We describe a compact and versatile multi-frequency laser system for laser-cooling potassium atoms, by frequency doubling a fiber-optic telecom beam ($\simeq 1534$ or $1540$~nm). Low-power fiber-based telecom lasers and components generate…
Using an affordable ytterbium laser with sub-mJ of energy combined with a novel pulse compression technique, we demonstrate an extremely competitive state-of-the-art terahertz (THz) source with 53 mW of average power and 310 kV/cm at focus…
Liquid-crystal microcavity lasers have attracted considerable attention because of their extraordinary tunability and sensitive response to external stimuli, and they operate generally within a specific phase. Here, we demonstrate a…
The influence of low temperatures on the performance of a high-power single-frequency fiber laser amplifier is evaluated with a numerical simulation. Cooling the fiber can allow to take advantage of both higher damping of the acoustic waves…
A planar triplet of diffraction gratings is used to transform a single laser beam into a four-beam tetrahedral magneto-optical trap. This `flat' pyramid diffractor geometry is ideal for future microfabrication. We demonstrate the technique…
We report on a novel pseudothermal light source based on laser light coupled into an optical multimode fiber. The setup is simple, of low cost, exhibits inherently high directional light emission and allows for a flexible arrangement. By…
We analyse the influence of heat generation by non radiative transitions in high power 1.55$\mu$m double cladding Erbium-Ytterbium fiber laser. At strong pumping rates, 1$\mu$m lasing can start due to parasitic reflections. We present a…
In the past, laser propagation in a fluid with heat transfer has been modeled using simplistic conduction and convection conditions yielding inaccurate predictions. Here we present a detailed numerical study describing the thermal profile…
Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies…
Active longitudinal beam optics can help FEL facilities achieve cutting edge performance by optimizing the beam to: produce multi-color pulses, suppress caustics, or support attosecond lasing. As the next generation of superconducting…
We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes…
A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum…
We demonstrate the first multimode fiber interference-based filtering in an all-fiber spatiotemporally mode-locked laser. The oscillator generates dissipative soliton pulses at 1036 nm with 12 mW average power, 6.24 ps duration and 24.3 MHz…
Mode division multiplexing has been mooted as a future technology to address the impending data crunch of existing fiber networks. Present demonstrations delineate the light source from the mode creation steps, potentially inhibiting…
Fiber fuse effect can occur spontaneously and propagate along optical fibers to cause wide-spread damage; it threatens all applications involving optical fibers. This paper presents two results. First, it establishes that the initiation of…