Related papers: Probing multipulse laser ablation by means of self…
In this work a method based on self-mixing interferometry (SMI) is presented for probing the concentration of plasma plumes induced by multi-pulse laser ablation. An analytical model is developed to interpret the single-arm interferometric…
Although ultrafast laser materials processing has advanced at a breakneck pace over the last two decades, most applications have been developed with laser pulses at near-IR or visible wavelengths. Recent progress in mid-infrared (MIR)…
Microfluidic mixing is an important means for in-situ sample preparation and handling while Small Angle X-Ray Scattering (SAXS) is a proven tool for characterising (macro-)molecular structures. In combination those two techniques enable…
In laser micromachining, the ablation threshold (minimum fluence required to cause ablation) is a key performance parameter and overall indicator of the efficiency of material removal. For pulsed laser micromachining, this important…
We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the…
Self-mixing interferometry (SMI) has been lauded for its sensitivity in detecting microvibrations, while requiring no physical contact with its target. Microvibrations, i.e., sounds, have recently been used as a salient indicator of…
Electronic devices are progressively fabricated on flexible substrates allowing new fields of applications. A maskless and very flexible structuring process is offered by ablation using ultra-short pulse laser irradiation. Usually, certain…
Ultrafast laser breakdown of wide bandgap dielectrics is today a key for major technologies ranging from 3D material processing in optical materials to nanosurgery. However, a contradiction persists between the strongly nonlinear character…
We provide measurements of ablation of four post-transition and transition metals (aluminum, copper, nickel and tungsten) irradiated by single 800 nm laser pulses, in ultrashort regime from 100 fs pulse duration down to 15 fs covering a…
A study of damage and ablation of silicon induced by two individual femtosecond laser pulses of different wavelengths, 1030 and 515 nm, is performed to address the physical mechanisms of dual-wavelength ablation and reveal possibilities for…
The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed…
A femtosecond laser is a powerful tool for micromachining of silicon. In this work, large-area laser ablation of crystalline silicon is comprehensively studied using a laser source of pulse width 300 fs at two wavelengths of 343 nm and 1030…
Ultrashort-pulse laser ablation of metals near damage threshold is governed by homogeneous spallation, in which tensile unloading releases a nanometre-thin liquid film whose optical signatures are temporally evolving concentric Newton rings…
A two-dimensional axisymmetric transient laser drilling model is used to analyze the effects of laser beam diameter and laser pulse duration on the laser drilling process. The model includes conduction and convection heat transfer, melting,…
We present a detailed investigation of the afterpulse effect in silicon photomultipliers (SiPMs), using a dedicated structure with single-cell readout. This enables direct measurement of intrinsic device properties and observation of…
Self-mixing interferometry is a measurement approach in which a laser beam is re-injected into the emitting laser itself after reflection on a target. Information about the position of the target can be obtained from monitoring the voltage…
Here, to the best of our knowledge, for the first time we report the in-depth experimental study of high ultrafast laser ablation efficiency for processing of copper and steel with single-pulses, MHz-, GHz- and burst in the burst (biburst)…
The ablation of solid tin surfaces by an 800-nanometer-wavelength laser is studied for a pulse length range from 500 fs to 4.5 ps and a fluence range spanning 0.9 to 22 J/cm^2. The ablation depth and volume are obtained employing a…
Ultra-intense laser-matter interaction experiments (>10$^{18}$ W/cm$^{2}$) with dense targets are highly sensitive to the effect of laser "noise" (in the form of pre-pulses) preceding the main ultra-intense pulse. These system-dependent…
In femtosecond laser micromachining, the ablation threshold is a key processing parameter that characterises the energy density required to cause ablation. Current techniques for measuring the ablation threshold such as the diameter…