Related papers: Probing multipulse laser ablation by means of self…
We demonstrate a slow-light augmented unbalanced Mach-Zehnder Interferometer (MZI) which can be used to enhance very significantly the sensitivity of measuring the frequency shift in a laser. The degree of enhancement depends on the group…
A molecular-dynamics thermal annealing model is proposed to investigate the mechanisms involved in picosecond pulsed laser ablation of crystalline silicon. In accordance with the thermal annealing model, a detailed description of the…
Femtosecond laser ablation of Ti, Zr and Hf has been investigated by means of in-situ plasma diagnostics. Fast plasma imaging with the aid of an intensified charged coupled device (ICCD) camera was used to characterise the plasma plume…
We investigate ablation experiments performed by laser-plasma-filament guided electrical discharges at high-voltages of up to 145 kV. The guiding was accomplished via fs-laser-generated plasma filaments across a gap of 201 mm of air onto…
Context: A turbulent atmosphere causes atmospheric piston variations leading to rapid changes in the optical path difference of an interferometer, which causes correlated flux losses. This leads to decreased sensitivity and accuracy in the…
High-power impulse magnetron sputtering (HiPIMS) offers considerable control over ion energy and flux, making it invaluable for tailoring the microstructure and properties of advanced functional coatings. However, compared to conventional…
Laser drilling becomes of increasing importance when hole diameter is in the range of 10 to 50 mum, for which conventional alternative approaches are becoming difficult and cost inefficient. Furthermore, it is viewed as the technique of…
In optical detection of ultrasound, resonators with high Q-factors are often used to maximize sensitivity. However, in order to perform parallel interrogation, conventional interferometric techniques require an overlap between the resonator…
A Synthetic Aperture Microwave Imaging (SAMI) system has been designed and built to obtain 2-D images at several frequencies from fusion plasmas. SAMI uses a phased array of linearly polarised antennas. The array configuration has been…
Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser-matter interactions…
Theoretical models of grain growth predict dust properties to change as a function of protoplanetary disk radius, mass, age and other physical conditions. We lay down the methodology for a multi-wavelength analysis of (sub-)mm and cm…
Using a modified self-consistent one-dimensional hydrodynamic lagrangian fluid code, laser ablation of solid copper by ultrashort laser pulses in vacuum was simulated to study fundamental mechanisms and to provide a guide for drilling…
The microwave imaging system(MIS) stands out among prominent imaging tools for capturing images of concealed obstacles. Leveraging its capability to penetrate through heterogeneous environments MIS has been widely used for subsurface…
Single vs. multimode laser beams have been compared for laser ablation on steel samples. Laser plasma properties and analytical capabilities (precision, limit of detection) were used as key parameters for comparison. Peak fluence at focal…
The effects of ultra-short laser pulses on reactive Ti/Al nano-layered thin film were investigated. The thin film composed of alternated titanium and aluminium nano-layers, was deposited by ion-sputtering. Single pulse irradiation was…
The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the…
We present a new method for aperture masking interferometric (AMI) imaging at near-IR wavelengths using radio astronomical techniques. The method starts with derivation of interferometric visibilities from a Fourier transform of the…
Laser ablation of Al-Ni alloys and Al films on Ni substrates has been studied by molecular dynamics simulations (MD). The MD method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons…
Laser machining and modification of black-Si (b-Si) by femtosecond laser Gaussian (G-) and Gauss-Bessel (GB-) beams are compared at a wavelength of 1030 nm. The GB-beam was generated using a diffractive axicon lens and 10x demagnification…
Silicon photomultipliers (SiPMs) are highly-sensitive photodetectors emerging as the technology of choice for many applications, including large high-energy physics experiments where they often are exposed to high radiation fluences. In…