Related papers: An Advanced NCRF Linac Concept for a High Energy e…

A new cavity-chain layout has been proposed for the main linac of the TESLA linear collider. This superstructure-layout is based upon four 7-cell superconducting standing-wave cavities, coupled by short beam pipes. The main advantages of…

An ultracold electron source based on near-threshold photoionization of a laser-cooled and trapped atomic gas is presented in this work. Initial DC acceleration to $\sim$10 keV and subsequent acceleration of the created bunches to 100 keV…

In this paper we present alternative approach for Future Circular electron-positron Collider. Current 100 km circumference design with the top CM energy of 365 GeV (182.5 GeV beam energy) is based on two storage rings to circulate colliding…

The Standing Wave (SW) TESLA niobium-based superconducting radio frequency structure is limited to an accelerating gradient of about 50 MV/m by the critical RF magnetic field. To break through this barrier, we explore the option of…

The conceptional design of the proposed linear electron-positron collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with an accelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. The design goal for…

The superconducting (SC) proton linac is proposed in the JAERI/KEK Joint Project for a high-intensity proton accelerator in the energy region from 400 to 600 MeV. Highly stable fields in the SC cavities are required under the dynamic…

CLIC is a linear $e^+e^-$ ($\gamma\gamma$) collider project which uses a drive beam to accelerate the main beam. The drive beam provides RF power for each corresponding unit of the main linac through energy extracting RF structures. CLIC…

Project-X is a leading candidate of the next major accelerator construction project at Fermilab. The mission need of Project-X is to establish an intensity frontier for particle physics research, or more precisely, to build a multi-MW…

There is demand for the construction of a medium-energy ion linear accelerator based on superconducting rf (SRF) technology. It must be capable of producing several hundred kilowatts of CW beams ranging from protons to uranium. A…

For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several…

To date, linear accelerators (linacs) as electron sources used to produce ionizing radiation for industrial purposes have been limited to less than 100 kW. When the electron beam is used directly, this is sufficient for most potential…

This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration…

LINAC 4 is a normal conducting H- linac proposed at CERN to provide a higher proton flux to the CERN accelerator chain. It should replace the existing LINAC 2 as injector to the Proton Synchrotron Booster and can also operate in the future…

In this paper, we give some guidelines for the design of linear accelerators, with special emphasis on their use in a hadron therapy facility. We concentrate on two accelerator layouts, based on linacs. The conventional one based on a linac…

The LHeC is the project for delivering electron-nucleon collisions at CERN using the HL-LHC beams. An Energy Recovery Linac in racetrack configuration will provide 50 GeV electrons to achieve centre-of-mass energies around 1 TeV/nucleon and…

The Cornell-BNL FFAG-ERL Test Accelerator (C$\beta$) will comprise the first ever Energy Recovery Linac (ERL) based on a Fixed Field Alternating Gradient (FFAG) lattice. In particular, we plan to use a Non Scaling FFAG (NS-FFAG) lattice…

A compact low-level RF (LLRF) control system based on RF system-on-chip (RFSoC) technology has been designed for the Advanced Concept Compact Electron Linear-accelerator (ACCEL) program, which has challenging requirements in both RF…

The cw CCL being designed for the Accelerator Production of Tritium (APT) project accelerates protons from 96MeV to 211MeV. It consists of 99 segments each containing up to seven accelerating cavities. Segments are coupled by intersegment…

We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole…

The FCC program at CERN provides an attractive all-in-one solution to address many of the key questions in particle physics. While we fully support the efforts towards this ambitious path, we believe that it is important to prepare a…