Related papers: Space-Charge Simulation of Integrable Rapid Cyclin…
The ICARUS-T600 detector is a 760-ton Liquid Argon Time Projection Chamber (LArTPC) currently operating at Fermilab as the Far Detector in the Short Baseline Neutrino (SBN) program. The SBN program is composed of three LArTPCs with a…
Frequency-agile lasers that can simultaneously feature low noise characteristics as well as fast mode hop-free frequency tuning are keystone components for applications ranging from frequency modulated continuous wave (FMCW) LiDAR, to…
To produce the intense, high-quality hadron beams required by future nuclear and high-energy physics experiments, synchrotrons need to overcome a most prominent intensity limitation i.e., space charge. This Letter characterizes the…
The Proton Improvement Plan phase II (PIP-II) project currently under construction at FNAL will replace the existing 400 MeV normal conducting linac with a new 800 MeV superconducting linac. The beam power in the downstream rapid-cycling…
The SIS100 synchrotron as a part of the new FAIR accelerator facility at GSI should be operated at the "space charge limit" for light and heavy ion beams. Beam losses due to space charge induced resonance crossing should not exceed a few…
This paper introduces an innovative imaging method using reconfigurable intelligent surfaces (RISs) by combining radar coincidence imaging (RCI) and computational imaging techniques. In the proposed framework, RISs simultaneously redirect…
We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational…
We present a design for an atomic synchrotron consisting of 40 hybrid magnetic hexapole lenses arranged in a circle. We show that for realistic parameters, hydrogen atoms with a velocity up to 600 m/s can be stored in a 1-meter diameter…
The coherent synchrotron radiation (CSR) of a high brightness electron beam traversing a series of dipoles, such as recirculation or transport arcs, may lead to the microbunching instability. We extend and develop a semi-analytical approach…
In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam…
The CALICE collaboration is currently developing an engineering prototype of an analog hadron calorimeter for a future linear collider like the ILC. One main task of this prototype is to demonstrate the feasibility of building a realistic…
The techniques of cavity optomechanics have enabled significant achievements in precision sensing, including the detection of gravitational waves and the cooling of mechanical systems to their quantum ground state. Recently, the inherent…
The Cornell Electron Storage Ring (CESR) was reconfigured in 2008 as a test accelerator to investigate the physics of ultra-low emittance damping rings. During the approximately 40 days/year available for dedicated operation as a test…
Using calculations and mathematical modeling, we demonstrate the feasibility of constructing a synchrotron storage ring for neutral polar molecules. The lattice is a racetrack type 3.6 m in circumference consisting of two of 180-degree…
The "Impulsive Stimulated Raman Scattering" (ISRS), is generally performed using ultrashort laser pulses. It shifts the frequency of the laser beam without any change of the wave surfaces and any appearance of extra lines. ISRS works with…
Synchrotron light sources can provide the required spatial coherence, stability and control that is required to support the development of advanced lithography at the extreme ultraviolet and soft X-ray wavelengths that are relevant to…
This paper presents an 8 GeV Rapid Cycling Synchrotron (RCS) option for Project X. It has several advantages over an 8 GeV SC linac. In particular, the cost could be lower. With a 2 GeV 10 mA pulsed linac as injector, the RCS would be able…
Electron optics in the solid state promises new functionality in electronics through the possibility of realizing micrometer-sized interferometers, lenses, collimators and beam splitters that manipulate electrons instead of light. Until…
Complex 3D integration of photonic and electronic integrated circuits is of particular interest to carry the photonics roadmap and to address challenges but involves mechanical stress, often detrimental for the behavior of optical…
Coherent optics has profoundly impacted diverse applications ranging from communications, LiDAR to quantum computations. However, building coherent systems in integrated photonics previously came at great expense in hardware integration and…