Related papers: A Novel Electrical Method to Measure Wire Tensions…
Straw tube detectors are single wire proportional counters that are widely used as a tracking device. We have carried out R$\&$D with a straw tube detector prototype. The motivation of this work is to study the stability of the performance…
We use synchrophasor measurements of the complex voltage and current at both ends of multiple transmission lines that connect areas of a power system to monitor the online voltage collapse margin. A new reduction is used to reduce the…
Coulomb drag between two quantum wires is exponentially sensitive to the mismatch of their electronic densities. The application of a magnetic field can compensate this mismatch for electrons of opposite spin directions in different wires.…
We have developed a real-time beam current density meter for charged particle beams. It measures the mean current density by collimating a uniform and large diameter primary beam. The suppression of the secondary electrons and the…
Recent developments of the AC-calorimetric technique adapted for the needs of high pressure experiments are discussed. A semi-quantitative measurement of the specific heat with a Bridgman-type of pressure cell as well as a diamond anvil…
The wire method is a more rapid and less costly method to measure impedances of RF components compared to methods using a beam. A setup using a single displaced wire to excite and measure transverse resonant modes in accelerating structures…
A simple but novel driver system has been developed to operate the wire gating grid of a Time Projection Chamber (TPC). This system connects the wires of the gating grid to its driver via low impedance transmission lines. When the gating…
Cross-spectrum analysis is a commonly-used technique for the detection of phase and amplitude noise of a signal in the presence of interfering noise. It extracts the desired correlated noise from two time series in the presence of…
We report a direct detection of time correlated single-electron tunneling oscillations in a series array of small tunnel junctions. Here the current, I, is made up of a lattice of charge solitons moving throughout the array by time…
We have developed a contact-free 2-dimensional laser sensor with which the position of wires can be measured in 3 dimensions with an accuracy of better than 10 micrometer and with which the tension of the wires can be determined with an…
We present the design, implementation, and validation of a cryo-compatible strain cell for elastoresistance measurements in quantum materials. The cell is actuated by three large-format piezoelectric stacks and enables both compressive and…
Several experimental techniques have been introduced in recent years in attempts to measure spin transfer torque in magnetic tunnel junctions (MTJs). The dependence of spin torque on bias is important for understanding fundamental spin…
A novel mechanical approach is developed to explore by means of atom-scale simulation the concept of line tension at a solid-liquid-vapor contact line as well as its dependence on temperature, confinement, and solid/fluid interactions. More…
We study the influence of many-body interactions on the transport characteristics of a novel device structure, consisting of a pair of quantum wires that are coupled to each other by means of a quantum dot. Under conditions where a local…
We have extended the range of the high-pressure optical spectroscopy to the far-infrared region keeping the accuracy of ambient-pressure experiments. The newly-developed method offers a powerful tool for the study of pressure-induced phase…
We present here the concept of three-arm current comparator impedance bridge, which allows comparisons among three unlike impedances. Its purpose is the calibration of impedances having arbitrary phase angles, against calibrated nearly-pure…
It is notoriously difficult to measure instantaneous supply current to a device such as an ASIC, FPGA, or CPU without also affecting the instantaneous supply voltage and compromising the operation of the device [21]. For decades designers…
Uniaxial stress, as well as hydrostatic pressure are often used to tune material properties in condensed matter physics. Here, we present a setup which allows for the study of the combined effects of quasi-uniaxial stress and hydrostatic…
We have measured the collective excitation spectrum of interacting electrons in one-dimension. The experiment consists of controlling the energy and momentum of electrons tunneling between two clean and closely situated, parallel quantum…
Noise-induced switching between coexisting metastable states occurs in a wide range of far-from-equilibrium systems including micro-mechanical oscillators, epidemiological and climate change models, and nonlinear electronic transport in…