Related papers: Multiphase strontium molybdate thin films for plas…
It is investigated the formation of the phase composition and structure in the nanoscaled CoSbx (30 nm) films deposited by the method of molecular-beam epitaxy on the substrates of the oxidated monocrystalline silicon at 200 C and following…
The resistivity of thin $La_{0.7}A_{0.3}MnO_{3}$ films ($A=Ca, Sr$) is investigated in a wide temperature range. The comparison of the resistivities is made among films grown by different techniques and on several substrates allowing to…
Post deposition variation in film resistance of Sb2Te3 films deposited on glass substrates at room temperature and an elevated temperature (110oC) are investigated. The resistance of films grown at room temperature shows a non-linear…
The temperature dependence of ultrafast photoinduced reflectivity transients is reported in Nd$_{0.5}$Sr$_{0.5}$MnO$_{3}$ thin film. The photoinduced reflectivity shows a complex response with very different temperature dependences on…
Dense and mesoporous 4% mol Yttria-stabilized zirconia thin films were deposited on amorphous silica substrates. The effects of the temperature on the mesostructure were analyzed, by applying different thermal treatments to the samples…
We report the synthesis and characterization of Nd_{0.5}Sr_{0.5}MnO_{3} thin films grown by the Pulsed Laser Deposition technique on 100 -oriented LaAlO_{3} substrates. X-ray diffraction (XRD) studies show that the films are 101 -oriented,…
Controlling the polymorph formation in organic semiconductor thin films by the choice of substrate and deposition temperature is a key factor for targeted device performance. Small molecular semiconductors such as the quadrupolar…
We report herein fabrication and characterization of a thin-film transistor (TFT) using single-crystalline, epitaxial SrTiO3 film, which was grown by a pulsed laser deposition technique followed by the thermal annealing treatment in an…
Plasmonics enables deep-subwavelength concentration of light and has become important for fundamental studies as well as real-life applications. Two major existing platforms of plasmonics are metallic nanoparticles and metallic films.…
The Channel-Spark method was used for deposition of highly oriented ferromagnetic La0.7Sr0.3MnO3 films on NdGaO3 substrates. It was found that additional oxygen decreases the film quality suppressing the Curie temperature and…
We report on the synthesis of high quality La$_{1/3}$Sr$_{2/3}$FeO$_3$ (LSFO) thin films using the pulsed laser deposition technique on both SrTiO$_3$ (STO) and LaAlO$_3$ (LAO) substrates (100)-oriented. From X-Ray diffraction (XRD)…
Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon…
La1-xCaxMnO3 (x = 0.3; LCMO) films of different thickness were sputter-deposited on SrTiO3(100) (STO) single crystal substrates with and without YBa2Cu3O7-d (YBCO) as template layer. The electric and magnetic properties and the…
By using electrochemical etching, we fabricated conductive ultrathin SrVO3 (SVO) films that exhibited metallic behavior down to 3 monolayers (ML). From an observed systematic change in transport properties with decreasing film thickness, it…
We report the development of broadband solar absorber coatings based on titanium suboxide composite thin films on aluminium substrates. The films are fabricated via scalable DC magnetron sputtering using a Ti target, followed by…
High-quality epitaxial SrVO3 (SVO) thin films of various thicknesses were grown on (001)-oriented LSAT substrates by pulsed electron-beam deposition technique. Thick SVO films (~25 nm) exhibited metallic behavior with the electrical…
The temperature dependent resistivity of two Pr1-xCaxMnO3 (x=0.5 and 0.4) thin films grown on LaAlO3 has been studied as a function of hydrostatic pressure (up to 2.5 GPa) and magnetic field (up to 9T). Both samples show a monotonic…
To stabilize the working temperature of an equipment, a solid-state thermal resistor is usually a requisite, which could adjust its heat conductance continuously according to the temperature. In this work, the thermal conductivity and the…
High quality vanadium sesquioxide V2O3 films (170-1100 {\AA}) were grown using the pulsed laser deposition technique on (0001)-oriented sapphire substrates, and the effects of film thickness on the lattice strain and electronic properties…
We present results on the development of nanocomposite NiO:Au thin-film hydrogen sensors, which are able to detect hydrogen concentrations as low as 2 ppm in air, operating at low temperatures in the range 125-150C. Thin NiO films were…