Related papers: Multiphase strontium molybdate thin films for plas…
Strontium molybdate (SrMoO3) thin films are shown to exhibit plasmonic behaviour with a zero crossover wavelength of the real part of the dielectric permittivity tunable between 600 and 950 nm (2.05 eV and 1.31 eV). The films are grown…
Materials such as W, TiN, and SrRuO3 (SRO) have been suggested as promising alternatives to Au and Ag in plasmonic applications owing to their refractory properties. However, investigation of the reproducibility of the optical properties…
Optical properties of refractory intermetallic thin films of Au$_{3}$Zr were experimentally investigated for the first time, which show distinctive plasmonic properties in the visible and near infrared region. The films were fabricated…
Epitaxial La0.7Sr0.3MnO3 (LSMO) thin films, with different thickness ranging from 20 nm up to 330 nm, were deposited on (100)-oriented strontium titanate (STO) substrates by pulsed laser deposition, and their structure and morphology…
Lead based relaxor ferroelectric thin films have been of technological importance due to excellent properties for several commercial applications. However subtleness and high cost of fabrication have plagued of these materials. In this work…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
The optical properties of thin films of intermetallic Au$_{3}$Hf were experimentally investigated for the first time, which display clear plasmonic properties in the optical and near infrared region with negative permittivity. In contrast…
In this article, an overview of the fabrication and properties of high quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high quality LSMO film combines a smooth surface morphology with a large magnetization and a small residual…
This research investigates the structural, topological, electrical and optical properties of pulsed laser deposited polycrystalline BiFeO3 thin films on silicon and glass substrate at varying deposition temperatures ranging from 400 degC to…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
Nb3Sn and V3Si thin films are promising candidates as thin films for the next generation of superconducting radio-frequency (SRF) cavities. However, sputtered films often suffer from stoichiometry and strain issues during deposition and…
A current approach to depositing highly plasmonic titanium nitride films using the magnetron sputtering technique assumes that the process is performed at temperatures high enough to ensure the atoms have sufficient diffusivities to form…
In recent years, photosensitive materials have been in huge demand because of their fascinating ability to convert absorbed photon energy to generate strain and henceforth tuning the physical properties. In this report we detect the…
The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a very few plasmonic metals are available, which limits the spectral range where these…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
We have investigated the magnetodynamic properties of $\text{La}_{0.7}\text{Sr}_{0.3}\text{MnO}_3$ (LSMO) films of thickness 10, 15 and 30 nm grown on (111)-oriented SrTi$\text{O}_3$ (STO) substrates by pulsed laser deposition.…
Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
A Li-Al-O thin film materials library, deposited by inert magnetron sputtering and post-deposition annealing in O2 atmosphere, was used to study the effects of different annealing temperatures (300 to 850{\deg}C) and durations (1 min to 7…
Next generation quantum technologies will need to rely on efficient transduction between electrical, optical, and mechanical quantum degrees of freedom to generate large-scale entanglement over large distances. The performance of such…