Related papers: Electroforming Free Controlled Bipolar Resistive S…
Bipolar resistive switching (BRS) phenomenon has been demonstrated in Mn3O4 using Al (Aluminum)/Mn3O4/FTO (Fluorine doped Tin Oxide) Resistive Random Access Memory (RRAM) device. The fabricated RRAM device shows good retention, non volatile…
High-performance non-volatile resistive random access memories (ReRAM) and their small stimuli control are of immense interest for high-speed computation and big-data processing in the emergent Internet of Things (IOT) arena. Here, we…
BiFeO3 thin films are deposited on FTO coated glass substrates using a simple sol-gel deposition technique, limiting thickness about 70 nm and Ag/BiFeO3/FTO RRAM devices are prepared. The devices showed low-voltage bipolar switching with…
Nanometallic devices based on amorphous insulator-metal thin films are developed to provide a novel non-volatile resistance-switching random-access memory (RRAM). In these devices, data recording is controlled by a bipolar voltage, which…
We studied the resistive memory switching in pulsed laser deposited amorphous LaHoO3 (LHO) thin films for non-volatile resistive random access memory (RRAM) applications. Nonpolar resistive switching (RS) was achieved in PtLHOPt memory…
We demonstrate low energy, forming and compliance-free operation of a resistive memory obtained by the partial oxidation of a two-dimensional layered van-der-Waals semiconductor: hafnium disulfide (HfS$_2$). Semiconductor - oxide…
We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a…
Here we study the resistive switching (RS) effect that emerges when ferroelectric BaTiO$_{3}$ (BTO) and few-layers MoSe$_{2}$ are combined in one single structure. The C-V loops reveal the ferroelectric nature of both Al/Si/SiO$_{x}$/BTO/Au…
In the present work, multi-level resistive switching (RS) in W/Co:TiO2/FTO structures induced by a multi-mixed mechanism was studied. It was found that the devices could be reproducibly programmed into three nonvolatile resistance states.…
Resistive switching memories allow electrical control of the conductivity of a material, by inducing a high resistance (OFF) or a low resistance (ON) state, using electrochemical and ion transport processes. As alternative to high…
The rapid growth of digital technology has driven the need for efficient storage solutions, positioning memristors as promising candidates for next-generation non-volatile memory (NVM) due to their superior electrical properties. Organic…
Interface-type resistive switching (RS) devices with lower operation current and more reliable switching repeatability exhibits great potential in the applications for data storage devices and ultra-low-energy computing. However, the…
Memory devices based on resistive switching (RS) have not been fully realised due to lack of understanding of the underlying switching mechanisms. Nature of ion transport responsible for switching and growth of conducting filament in…
Resistive switching in thin films has been widely studied in a broad range of materials. Yet the mechanisms behind electroresistive switching have been persistently difficult to decipher and control, in part due to their non-equilibrium…
Non-volatile resistive switching is demonstrated in memristors with nanocrystalline molybdenum disulfide (MoS$_2$) as the active material. The vertical heterostructures consist of silicon, vertically aligned MoS$_2$ and chrome / gold metal…
Resistive and capacitive switching in capacitor metal/nanocomposite/metal (M/NC/M) structures based on (CoFeB)x(LiNbO3)100-x NC fabricated by ion-beam sputtering with metal content x $\approx$ 8-20 at. % is studied. The peculiarity of the…
We report on resistive switching (RS) characteristics of W/WO3-x/Pt-based thin film memristors modulated by precisely controlled oxygen non-stoichiometry. RS properties of the devices with varied oxygen vacancy (VO) concentration have been…
The effect on the resistive switching (RS) mechanism in organic semiconductor (OSC), Poly(3-hexylthiophene-2,5-diyl) (P3HT), due to the presence of the perforated bottom electrode (PBE) is investigated. The simulation shows a high local…
Transition metal oxides (TMOs) and post-TMOs (PTMOs), when doped with Carbon, show non-volatile current-voltage (I-V) characteristics, which are both universal and repeatable. We have shown spectroscopic evidence of the introduction of…
Low-frequency 1/f voltage noise has been employed to probe stochastic charge dynamics in AlO$_{x}$-based non-volatile resistive memory devices exhibiting both resistive switching (RS) and magneto-resistive (MR) effects. A 1/f$^{\gamma}$…