Related papers: Exceed Improved Efficient Perovskite Solar Cells U…
We report on the fabrication of two-dimensional periodic photonic nanostructures by nanoimprint lithography and dry etching, and their integration into a 1-{\mu}m-thin mono-crystalline silicon solar cell. Thanks to the periodic…
In recent years, halide perovskite-based solar cells have received intensive attention, and demonstrated power conversion efficiency as high as 25.8%. With regard to the toxicity of Pb and the instability of organic elements, all inorganic…
The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency…
Carbon-electrode-based PSC devices are stressed under 1 Sun equivalent illumination in a stability setup, and different scan-speed dependent current-voltage (J-V) curves are measured during aging. The collected data is used to estimate…
The grain boundaries of perovskite films prepared by the solution method are highly disordered, with a large number of defects existing at the grain boundaries. These defect sites promote the decomposition of perovskite. Here, we use…
Lead-halide perovskites have demonstrated astonishing increases in power conversion efficiency in photovoltaics over the last decade. The most efficient perovskite devices now outperform industry-standard multi-crystalline silicon solar…
Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could…
In this work, we report optical and photovoltaic properties of ZnO based solid polymeric photoelectrochemical (PEC) cell. In this device construction, film of ZnO nanoparticle (NP) has been sandwiched between ITO and LiClO4-PEO solid…
Lead halide-based perovskite thin films have attracted great attention due to the explosive increase in perovskite solar cell efficiencies. The same optoelectronic properties that make perovskites ideal absorber materials in solar cells are…
Perovskite solar cells (PSC) are promising potential competitors to established photovoltaic technologies due to their superior efficiency and low-cost solution processability. However, the limited understanding of the crystallization…
Poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) has been widely used as a hole transport layer in perovskite solar cells (PSCs). However, the high interface defect density and energy level mismatch between PEDOT:PSS and…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
In contrast to lead-based perovskites, double perovskites have attracted considerable interest due to their ability to modulate photovoltaic properties and high stability through elemental control. However, most double perovskites are…
Perovskite indoor photovoltaics (PIPVs) are emerging as a transformative technology for low-light intensity energy harvesting, owing to their high power conversion efficiencies (PCEs), low-cost fabrication, solution-processability, and…
Perovskite-based optoelectronic devices have gained significant attention due to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes (LEDs), non-radiative charge…
The lead-free double perovskite material (viz. Cs$_2$AgBiCl$_6$) has emerged as an efficient and environmentally friendly alternative to lead halide perovskites. To make Cs$_2$AgBiCl$_6$ optically active in the visible region of solar…
The ideal band gap for a photovoltaic active layer for the solar spectrum is around 1.3 eV. However oxides with such values are rare. One of the most studied oxides to date as a photovoltaic active layer is the cuprous oxide Cu2O. Its band…
Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high…
Hybrid perovskites have received tremendous attention due to their exceptional photovoltaic and optoelectronic properties. Among the two widely used perovskite solar cell device architectures of n-ip and p-i-n, the latter is interesting in…
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic…