Related papers: Investigation on the performance of a ducted prope…
We examine the fluid flow forced by precession of a rotating cylindrical container using numerical simulations and experimental flow measurements with ultrasonic Doppler velocimetry (UDV). The analysis is based on the decomposition of the…
Reynolds-averaged Navier-Stokes (RANS) equations are presently one of the most popular models for simulating turbulence. Performing RANS simulation requires additional modeling for the anisotropic Reynolds stress tensor, but traditional…
In-cylinder flow structures and turbulence characteristics are investigated using direct numerical simulations (DNS) in a laboratory-scale engine at technically relevant engine speeds (1500 and 2500 rpm at full load). The data is computed…
Cross-flow turbines harness kinetic energy in wind or moving water. Due to their unsteady fluid dynamics, it can be difficult to predict the interplay between aspects of rotor geometry and turbine performance. This study considers the…
A high-order flux reconstruction method coupled with a high-order sliding mesh method is applied to analyze the performance of a ducted wind turbine at a Reynolds number of $1.25\times 10^6$. To investigate the impacts of the duct, axial…
In this article, the hydrodynamic characteristics of Autonomous Underwater Vehicles (AUVs) are investigated and analyzed under the influence of rotating flow fields, that were generated in a recirculating water tank via a rotating…
A non-hydrostatic depth-averaged model for dry granular flows is proposed, taking into account vertical acceleration. A variable friction coefficient based on the $\mu(I)$ rheology is considered. The model is obtained from an asymptotic…
Bio-inspired oscillatory foil propulsion has the ability to traverse various propulsive modes by dynamically changing the foil's heave and pitch kinematics. This research characterizes the propulsion properties and wake dynamics of a…
A deep learning (DL) closure model for large-eddy simulation (LES) is developed and evaluated for incompressible flows around a rectangular cylinder at moderate Reynolds numbers. Near-wall flow simulation remains a central challenge in…
Despite their well-known limitations, RANS models remain the most commonly employed tool for modeling turbulent flows in engineering practice. RANS models are predicated on the solution of the RANS equations, but these equations involve an…
In this contribution, we focus on the Reynolds-Averaged Navier-Stokes (RANS) models and their exploitation to build reliable reduced order models to further accelerate predictions for real-time applications and many-query scenarios.…
Rotors operating in confined flows, or blockage, are commonly encountered in wind and water tunnels, as well as in shallow or dense deployments of hydrokinetic turbines. Confinement induces a streamwise pressure gradient in the channel,…
The Reynolds-averaged Navier-Stokes (RANS) equations require accurate modeling of the anisotropic Reynolds stress tensor. Traditional closure models, while sophisticated, often only apply to restricted flow configurations. Researchers have…
We report an experimental investigation of turbulent Rayleigh-Benard convection in a rectangular cell of large aspect ratio ($\Gamma = 10$) over the Rayleigh number range $5.4\times10^7 \le Ra \le 7.2\times10^9$ and Prandtl number range…
We study the dynamics of a one-dimensional fluid of orientable hard rectangles with a non-coarse-grained microscopic mechanism of facilitation. The length occupied by a rectangle depends on its orientation, which is coupled to an external…
A new model for the "rapid" part of the velocity/pressure-gradient correlation in the Reynolds averaged Navier-Stokes equations is suggested. It is shown that in an inhomogeneous incompressible turbulent flow, the model that is linear in…
We present pore-resolved direction numerical simulations (DNS) of turbulent flows grazing over perforated plates, that closely resemble the acoustic liners found on aircraft engines. Our DNS explore a large parameter space including the…
Solving the Reynolds-averaged Navier-Stokes equations (RANS) closed with an eddy viscosity computed through a turbulence model is still the leading approach for Computational Fluid Dynamics simulations. Unfortunately, universal models with…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
We study the statistical properties of orientation and rotation dynamics of elliptical tracer particles in two-dimensional, homogeneous and isotropic turbulence by direct numerical simulations. We consider both the cases in which the…