Related papers: Selective etching of PDMS: etching as positive res…
We show that plasmonic solid-state nanopores with tunable hole diameter can be prepared via a photocatalytic effect resulting from the enhanced electromagnetic field inside a metallic ring prepared on top of a dielectric nanotube. Under…
Dilational materials are stable three-dimensional isotropic auxetics with an ultimate Poisson's ratio of -1. We design, evaluate, fabricate, and characterize crystalline metamaterials approaching this ideal. To reveal all modes, we…
We design two-dimensional (2D) mechanical metamaterials that may be deformed substantially at little or no energy cost. Examples of such deformable structures are assemblies of rigid isosceles triangles hinged in their corners on the…
We show that the rough particles studded with platinum nanoparticles can be fabricated straightforwardly and in a single step at room temperature. These rough particles displayed a good catalytic power (100% removal efficiency) against a…
We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and…
We present a detailed study of the gain length in an active medium obtained by doping of DNA strands with DCM dye molecules. The superior thermal stability of the composite and its low quenching, permits to obtain optical gain coefficient…
We reveal new aspects of the interaction between plasmons and phonons in 2D materials that go beyond a mere shift and increase in plasmon width due to coupling to either intrinsic vibrational modes of the material or phonons in a supporting…
Silicon Carbide (SiC) is an outstanding material, not only for electronic applications, but also for projected functionalities in the realm of photonic quantum technologies, nano-mechanical resonators and photonics on-a-chip. For shaping 3D…
A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+ Si and Si0.7Ge0.3 using the combinations of HNO3 oxidation and BOE oxide removal processes were studied.…
Nowadays, microelectronics and nanoelectronics require the search for new materials, including masks for creating structures. Today, the intermediate hard mask strategy is one of the key issues in achieving a good balance between…
Metal meshes have emerged as an important class of flexible transparent electrodes. We report on the characteristics of a new class of asymmetric meshes, tiled using a recently-discovered family of pentagons. Micron-scale meshes were…
This study presents techniques for the mass production of large-sized GEM foils for the CMS phase-2 upgrade by the Korean CMS group. The foil production facility is designed with a focus on mass production, including the adoption of the…
Magnesium and its alloys are being considered for biodegradable biomaterials. However, high and uncontrollable corrosion rates have limited the use of magnesium and its alloys in biological environments. In this research, high purified…
We have performed resistivity measurements of poly[3,4-ethylenedioxythiophene]: poly[styrenesulfonate] (PEDOT:PSS) films with varying concentrations of glycerol. Resistivity is seen to decrease exponentially from roughly 3 ohm-cm for pure…
We fabricated thin-films made from polydimethylsiloxane (PDMS) with embedded high-index (n~1.9-2.2) microspheres for super-resolution imaging applications. To control the position of microspheres, such films can be translated along the…
Three-dimensional (3D) etching of materials by plasmas is an ultimate challenge in microstructuring applications. A method is proposed to reach a controllable 3D structure by using masks in front of the surface in a plasma etch reactor in…
As humanity advances toward long-term lunar presence under NASA's Artemis program, the development of lunar-based manufacturing and construction (LBMC) capabilities has become increasingly critical. The high cost of transporting materials…
Metal hydrides are critical materials in numerous technologies including hydrogen storage, gas separation, and electrocatalysis. Here, using Pd-H as a model metal hydride, we perform electrochemical insertion studies of hydrogen via liquid…
Layered optical devices with a lateral gradient can be fabricated through electrochemical synthesis of porous silicon (PS) using a position dependent etching current density $\bm j(\bm r_\|)$. Predicting the local value of $\bm j(\bm r_\|)$…
One pot synthetic technique was used to synthesize mesoporous fullerene using highly ordered mesoporous template such as KIT6-150 and SBA-15-150. Highly ordered porous fullerene with cross linkage between the fullerene molecules was…