Related papers: Quasi-static microdroplet production in a capillar…
We have developed Norland Optical Adhesive (NOA) flow focusing devices, making use of the excellent solvent compatibility and surface properties of NOA to generate micron scale oil-in-water emulsions with polydispersities as low as 5%.…
Liquid drops can be kept from touching a plane solid surface by a gas stream entering from underneath, as it is observed for water drops on a heated plate, kept aloft by a stream of water vapor. We investigate the limit of small flow rates,…
A phase--field method is applied to the modeling of flow and breakup of droplets in a T--shaped junction in the hydrodynamic regime where capillary and viscous stresses dominate over inertial forces, which is characteristic of microfluidic…
Microscopic multiphase flows have gained broad interest due to their capability to transfer processes into new operational windows and achieving significant process intensification. However, the hydrodynamic behavior of Taylor droplets is…
Displacement experiments carried out in microfluidic porous media analogs show that reduced surface tension leads to a more stable displacement, opposite to the process in Hele-Shaw cells where surface tension stabilizes the displacement of…
Chemical control of the spontaneous motion of a reactive oil droplet moving on a glass substrate under an aqueous phase is reported. Experimental results show that the self-motion of an oil droplet is confined on an acid-treated glass…
We present a theoretical study of the statics and dynamics of a partially wetting liquid droplet, of equilibrium contact angle $\theta_{\rm e}$, confined in a solid wedge geometry of opening angle $\beta$. We focus on a mostly non-wetting…
We investigate theoretically the stability of thermo-capillary convection within a droplet when heated by a point source from below. To model the droplet, we use a mathematical model based on lubrication theory. We formulate a base-state…
An example of capillary phenomena commonly seen and often studied is a droplet of water hanging in air from a horizontal surface. A thin capillary surface interface between the liquid and gas develops tangential surface tension, which…
Droplets are the core functional units in microfluidic technologies that aim to integrate computation and reaction on a single platform. Achieving directed transport and control of these droplets typically demands elaborate substrate…
Conventional phase segregation is controlled by a positive interfacial tension, which implies that the system relaxes towards a state in which the interfacial area (or length) is minimized, typically manifesting as a single droplet that…
We present an experimental investigation of the agglomeration of microbubbles into a 2D microfoam and its flow in a rectangular microchannel. Using a flow-focusing method, we produce the foam in situ on a microfluidic chip for a large range…
This paper describes the techniques and physical parameters used to produce stable centimetric water drops in microgravity, and to study single cavitation bubbles inside such drops (Parabolic Flight Campaigns, European Space Agency ESA).…
The first large length-scale capillary rise experiments were conducted by R. Siegel using a drop tower at NASA LeRC shortly after the 1957 launch of Sputnik I. Siegel was curious if the wetting fluid would expel from the end of short…
The production of small fluid droplets relies on an instability of solutions to the Young-Laplace equation. We ask whether smaller droplets can be produced by changing the shape of the nozzle. At a given critical pressure, the circular…
Contact angle hysteresis of a macroscopic droplet on a heterogeneous but flat substrate is studied using the interface displacement model. First, the apparent contact angle of a droplet on a heterogeneous surface under the condition of…
We present a microfluidic platform for two-dimensional manipulation of water droplets immersed in bulk oil-based ferrofluid. Although non-magnetic, the droplets are exclusively controlled by magnetic fields, without any pressure-driven…
In this study, capillary-driven flow of different pure liquids and diluted bitumen samples were studied using microfluidic channel (width of 30 um and depth of 9 um). Capillary filling kinetics of liquids as a function of time were…
We show how anisotropic, grooved features facilitate the trapping and directed transport of droplets on lubricated, liquid-shedding surfaces. Capillary action pins droplets to topographic surface features, enabling transport along the…
Pumping fluids without an aid of an external power source are desirable in a number of applications ranging from a cooling of microelectronic circuits to Micro Total Analysis Systems (micro-TAS). Although, several microfluidic pumps exist,…