Related papers: Solid-state-processing of d_PVDF
Piezoelectricity, the generation of electric charge in response to mechanical stress, is a key property in both natural and synthetic materials. This study significantly boosts the piezoelectric response of chitosan, a biodegradable…
Digital Glass Forming (DGF) is a new manufacturing process for low-batch glass fabrication. The work zone temperature in DGF processes must be maintained in the glass's working range to ensure good fabrication. If the temperature is too…
Heteroepitaxial spinel ferrites NiFe2O4 and CoFe2O4 films have been prepared by pulsed laser deposition (PLD) at various temperatures (175 - 690 {\deg}C) under ozone/oxygen pressure of 10 mTorr. Due to enhanced kinetic energy of ablated…
The low-dimensional ferroelectrics, ferrielectrics and antiferroelectrics are of urgent scientific interest due to their unusual polar, piezoelectric, electrocaloric and pyroelectric properties. The strain engineering and strain control of…
The development of high-performance multifunctional polymer-based electronic circuits is a major step towards future flexible electronics. Here, we demonstrate a tunable approach to fabricate such devices based on rationally designed…
We describe the fabrication and characterization of solid 3-dimensional electrodes in direct contact with microfluidic channels, implemented using a single photolithography step, allowing operation in high-dielectric constant media.…
We report the fabrication of electrically functional polyaniline thin-film microdevices. Polyaniline films were printed in the solid phase by Laser Induced Forward Transfer directly between Au electrodes on a Si/SiO2 substrate. To apply…
Halide perovskite-based photodiodes are promising for efficient detection across a broad spectral range. Perovskite absorber thin-films have a microcrystalline morphology, characterized by a high density of surface states and defects at…
Thermodynamic multi-component solution solidification approach to liquid-to-glass transition is proposed and actual mechanisms underlying vitrification, other than viscous slowdown, are identified. Due to polydisperse aggregation in liquid…
This study presents the simulation, experimentation, and design considerations of a Poly(vinylidene fluoride co-trifluoroethylene)/ Polyethylene Terephthalate (PVDF-TrFe / PET), laser-cut, flexible piezoelectric energy harvester. It is…
We have grown VO2 thin films by laser ablation for electronic device applications. In obtaining the thin films of the pure VO2 phase, oxygen partial pressure is a critical parameter because vanadium oxides have several phases with the…
Here, we report the existence of large remnant polarization and dielectric constant in PbTiO3 buffered polycrystalline (BiFeO_3)_{1-x} (PbTiO_3)_x thin films of composition x = 0.25, 0.30 and 0.35 around the morphotropic phase boundary. The…
Wurtzite-type Al$_{1-x}$Sc$_x$N solid solutions grown by metal organic chemical vapour deposition are for the first time confirmed to be ferroelectric. The film with 230 nm thickness and x = 0.15 exhibits a coercive field of 5.5 MV/cm at a…
We demonstrate tunable solid state and flexible graphene field effect devices (FEDs) fabricated using a poly(methylmethacrylate) (PMMA) and lithium fluoride (LiF) composite dielectric. Increasing the concentration of LiF in the composite…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
For the past two decades piezo MEMS technology are emerging for its low power consumption of ultrasonic sensing and actuation devices for biomedical applications. Still researchers are facing challenges in miniaturization of piezo-MEMS…
A polycrystalline solid is modelled as an ensemble of random irregular polyhedra filling the entire space occupied by the solid body, leaving no voids or flaws between them. Adjacent grains can slide with a relative velocity proportional to…
We analyze the temperature dependences of the effective dielectric permittivity of P(VDF-TrFE) films with BaTiO3 nanoparticles (with the average size 24 nm). Transition from a weak to a strong nonlinear temperature dependence of the…
Solid-state cooling is an environmentally friendly and highly scalable technology that may solve most of the problems associated with current refrigerant methods. Solid-state cooling consists of applying external fields on caloric…
The ground-state polarization of PbTiO3 thin films is studied using a microscopic effective Hamiltonian with parameters obtained from first-principles calculations. Under short-circuit electrical boundary conditions, (001) films with…