Related papers: Effect of oxygen plasma on nanomechanical silicon …
Oxygen plasma is a widely used treatment to change the surface properties of organic layers. This treatment is particularly interesting to enable the deposition from solution of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)…
Microwave loss in niobium metallic structures used for superconducting quantum circuits is limited by a native surface oxide layer formed over a timescale of minutes when exposed to an ambient environment. In this work, we show that…
Zirconium nitride (ZrN) is a refractory material with good mechanical and thermal properties. It is therefore a good candidate for hard surface treatment at high temperature. In this work, we report the growth and characterization of ZrN by…
This work demonstrates the viability of scandium oxide deposition on silicon by means of high pressure sputtering. Deposition pressure and radio frequency power are varied for optimization of the properties of the thin films and the ScOx-Si…
In-depth understanding of the retarded oxidation phenomenon observed during the oxidation of silicon nanostructures is proposed. The wet thermal oxidation of various silicon nanostructures such as nanobeams, concave/convex nanorings and…
We resolve the thermal motion of a high-stress silicon nitride nanobeam at frequencies far below its fundamental flexural resonance (3.4 MHz) using cavity-enhanced optical interferometry. Over two decades, the displacement spectrum is…
Chemical vapour deposition (CVD) grown nanocrystalline diamond is an attractive material for the fabrication of devices. For some device architectures, optimisation of its growth on silicon nitride is essential. Here, the effects of three…
Oxygen-plasma pre-cleans are routine before fabrication, but on BaTiO3 thin films we observed catastrophic photoresist lift-off during mild rinsing and sonication. To explain the failure, we combined optical microscopy, EDS, and XPS. EDS…
Directly examining subcellular mechanics whilst avoiding excessive strain of a live cell requires the precise control of light stress on very small areas, which is fundamentally difficult. Here we use a glass nanopipet out of contact with…
Mechanical properties of a nanomechanical resonator have a significant impact on the performance of a resonant Nano-electromechanical system (NEMS) device. Here we study the mechanical properties of suspended membranes fabricated out of…
Controlling the strain in two-dimensional materials is an interesting avenue to tailor the mechanical properties of nanoelectromechanical systems. Here we demonstrate a technique to fabricate ultrathin tantalum oxide nanomechanical…
The formation of gaseous, spherical cap-shaped domains (so-called "surface nanobubbles") at the solid-liquid interface is a topic of fundamental interest due to the possible effects of nanobubbles on surface cleaning, wetting, and nanoscale…
In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, dissipation dilution, is employed in mirror suspensions of gravitational wave interferometers…
Near-surface nitrogen-vacancy ({NV}) centers in diamond have been successfully employed as atomic-sized magnetic field sensors for external spins over the last years. A key challenge is still to develop a method to bring NV centers at…
Laser nitriding represents a versatile approach for tailoring the surface properties of metals. Up to now, its effect on the superconducting response of niobium nitrides remains largely unexplored. In this work, the nitriding process of…
ZnO nanoparticles (NP) of size less than around 20 nm inside a chamber exhibits complete reduction in their visible photoluminescence (PL) intensity when partial pressure of oxygen in the surrounding gaseous environment is decreased by…
A convenient method has been developed to thin electron beam fabricated Silicon nanopillars under controlled surface manipulation by transforming the surface of the pillars to an oxide shell layer followed by the growth of sacrificial…
The small mass and high coherence of nanomechanical resonators render them the ultimate force probe, with applications ranging from biosensing and magnetic resonance force microscopy, to quantum optomechanics. A notorious challenge in these…
Commercial titanium dioxide is successfully plasma-treated under ambient conditions for different time periods, leading to reduced crystallite size and the creation of oxygen vacancies. Density functional theory-based calculations reveal…
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400{\deg}C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up…