Related papers: InGaN Metal-IN Solar Cell: optimized efficiency an…
On the road towards next generation high efficiency solar cells, the ternary Indium Gallium Nitride (InGaN) alloy is a good passenger since it allows to cover the whole solar spectrum through the change in its Indium composition. The choice…
The Indium Gallium Nitride (InGaN) III-Nitride ternary alloy has the potentiality to allow achieving high efficiency solar cells through the tuning of its band gap by changing the Indium composition. It also counts among its advantages a…
A two-dimensional model was developed to simulate the optoelectronic characteristics of indium-gallium-nitride (InGaN), thin-film, Schottky-barrier solar cells. The solar cells comprise a window, designed to reduce the reflection of…
Aluminum Indium Nitride (AlInN) alloys offer great potential for photovoltaic devices thanks to their wide direct bandgap energy that covers the solar spectrum from 0.7 eV (InN) to 6.2 eV (AlN), and their superior resistance to high…
The optical properties of V graded InGaN solar cells are studied. Graded InGaN well structures with the indium composition increasing then decreasing in a V shaped pattern have been designed. Through polarization doping, this naturally…
The photovoltaic properties of (0001) n-InGaN/p-GaN single heterojunctions were investigated numerically and compared with those of conventional p-GaN/i-InGaN/n-GaN structures, employing realistic material parameters. This alternative…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
The performances of various configurations of InGaN solar cells are compared using nextnano software. Here we compare a flat base graded wall GaN/InGaN structure, with an InxGa1-xN well with sharp GaN contact layers, and an InxGa1-xN…
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type doping in the emitter…
This study presents a comprehensive simulation-based optimization of gallium nitride (GaN)-based metal-semiconductor-metal (MSM) photodetectors designed for ultraviolet (UV) applications. The proposed device architecture incorporates a…
Thin-film solar cells with CuIn$_x$Ga$_{1-x}$Se$_2$ (CIGS) absorber are still far below their efficiency limit, although lab cells reach already 19.9%. One important aspect is the homogeneity of the alloy. Large-scale simulations combining…
Intermediate band solar cells hold the promise of ultrahigh power conversion efficiencies using a single semiconductor junction. Many current implementations use materials with bandgaps too small to achieve maximum efficiency or use…
Solar cells manufactured on top of Ge substrates suffer from inherent drawbacks that hinder or limit their potential. The most deleterious ones are heavy weight, high bulk recombination, lack of photon confinement and an increase of the…
Tellurium allows attaining heavy n-type doping levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice…
InGaN-based visible LEDs find commercial applications for solid-state lighting and displays, but lattice mismatch limits the thickness of InGaN quantum wells that can be grown on GaN with high crystalline quality. Since narrower wells…
InGaN is an ideal alloy system for optoelectronic devices due its tunable band gap. Yet high-quality InGaN requires high In concentration, which is a challenging issue that limits its use in green-light LEDs and other devices. In this…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
The power conversion efficiency of an ultrathin CIGS solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS…
In this study, we designed and optimized the performance of pin junction GaAs/AlGaAs heterojunction nanowire solar cell arrays. It is done by performing coupled optoelectronic simulations to find the optimal doping for the GaAs core and…