Related papers: A Manganin Foil Sensor for Small Uniaxial Stress
Uniaxial tensile tests are performed on a polymethyl methacrylate (PMMA) grade over a range of temperatures near the glass transition and over two decades of strain rate. Deformation maps are constructed for Young's modulus, flow strength,…
Acrylic is a popular structural material in experiments requiring low background because of its radio-purity, machinability, and mechanical strength. However, its porosity may cause significant gas absorption and influence the detector…
A sensor for thermal and thermodynamic measurements of small magnetic systems have been designed and built. It is based on a 5μm-thick suspended polymer membrane, which has a very low heat capacity (≈ 10-6 J/K at nitrogen…
A new set-up to measure acoustic wave velocities through deforming rock samples at high pressures (up to 1000 MPa), temperatures (up to 700$^\circ$C) and differential stress (up to 1500 MPa) has been developed in a recently refurbished gas…
We present here a novel cantilever based apparatus to perform translational stress or strain controlled rheology in very soft solids, and obtain simultaneous confocal imaging of the 3 dimensional microstructure. The stress is measured using…
A combination of micro-Raman spectroscopy and micro-XPS (X-ray photo-electron spectroscopy) mapping on statically deflected p-type silicon cantilevers is used to study the mechanical stress dependence of the Fermi level pinning at an…
Squeeze film pressure sensors, exploiting the dynamical modification of the mechanical properties of oscillating elements due to the compression of a fluid in a small gap region, allow for direct and absolute pressure measurements. This…
Surface stress, also known as surface tension, is a fundamental material property of any interface. However, measurements of solid surface stress in traditional engineering materials, such as metals and oxides, have proven to be very…
Integrating multiple sensing capabilities into a single multimodal sensor greatly enhances its applications for in-situ sensing and structural health monitoring. However, the fabrication of multimodal sensors is complicated and limited by…
We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are: 1:1 isopentane/n-pentane, 4:6…
The high flexibility, impermeability and strength of graphene membranes are key properties that can enable the next generation of nanomechanical sensors. However, for capacitive pressure sensors the sensitivity offered by a single suspended…
We report the design and construction of a two-axis goniometer capable of any sample orientation with respect to the external magnetic field. The advantage of this design is that it allows free rotations around a single axis independent of…
A Faraday force magnetometer is presented for measurements of magnetization at temperatures down to 100~mK and in magnetic fields up to 14~T. The specimen is mounted on a flexible cantilever forming a force-sensing capacitor in combination…
Mechanical resonators based on low-dimensional materials are promising for force and mass sensing experiments. The force sensitivity in these ultra-light resonators is often limited by the imprecision in the measurement of the vibrations,…
Bernoulli pads generate locally large wall shear stresses on workpieces, which can be used for cleaning, but may also damage delicate surfaces. This work presents direct measurements of the wall shear stress using constant temperature…
The pressure dependence of the resistivity and structure of La0.60Y0.07Ca0.33MnO3 has been explored in the pressure range from 1 atm to ~7 GPa. The metal to insulator transition temperature (TMI) was found to reach a maximum and the…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
We present an automatic measurement platform that enables the characterization of nanodevices by electrical transport and optical spectroscopy as a function of uniaxial stress. We provide insights into and detailed descriptions of the…
Measuring stress levels in loaded structures is crucial to assess and monitor their health, and to predict the length of their remaining structural life. However, measuring stress non-destructively has proved quite challenging. Many…
This study is focused on the mechanical characterization of materials used in microelectronic and micro- electromechanical systems (MEMS) devices. In order to determine their mechanical parameters, a new deformation bench test with suitable…