Related papers: Sub-Nyquist Channel Estimation over IEEE 802.11ad …

Ubiquitous multicore processors nowadays rely on an integrated packet-switched network for cores to exchange and share data. The performance of these intra-chip networks is a key determinant of the processor speed and, at high core counts,…

The ambitious performance targets of modern wireless networks, including 6G and Industrial IoT (IIoT) systems, necessitate advanced hardware platforms utilizing millimeter-wave (mmWave) technology. High-frequency signals provide the…

Near-field channel estimation is a fundamental challenge in the sixth-generation (6G) wireless communication, where extremely large antenna arrays (ELAA) enable near-field communication (NFC) but introduce significant signal processing…

Future wireless networks will extensively rely upon bandwidths centered on carrier frequencies larger than 10GHz. Indeed, recent research has shown that, despite the large path-loss, millimeter wave (mmWave) frequencies can be successfully…

As technology grows, higher frequency signals are required to be processed in various applications. In order to digitize such signals, conventional analog to digital convertors are facing implementation challenges due to the higher sampling…

The IEEE 802.11 standards, culminating in IEEE 802.11be (Wi-Fi 7), have significantly expanded bandwidth capacities from 20 MHz to 320 MHz, marking a crucial evolution in wireless access technology. Despite these advancements, the full…

In this paper we describe the status of the first prototype of the 60 GHz wireless Multi-gigabit data transfer topology currently under development at University of Heidelberg using IBM 130 nm SiGe HBT BiCMOS technology. The 60 GHz band is…

We present the design and hardware implementation of a radar prototype that demonstrates the principle of a sub-Nyquist collocated multiple-input multiple-output (MIMO) radar. The setup allows sampling in both spatial and spectral domains…

A great number of Internet of Things (IoT) and machine-to-machine (M2M) based applications require energy efficient, long range and low data rate wireless communication links. In order to offer a competitive solution in these areas, IEEE…

We show that to lower the sampling rate in a spread spectrum communication system using Direct Sequence Spread Spectrum (DSSS), compressive signal processing can be applied to demodulate the received signal. This may lead to a decrease in…

Channel Estimation is a major problem encountered by receiver designers for wireless communications systems. The fading channels encountered by the system are usually time variant for a mobile receiver. Besides, the frequency response of…

Channel uncertainty and co-channel interference are two major challenges in the design of wireless systems such as future generation cellular networks. This paper studies receiver design for a wireless channel model with both time-varying…

Contactless sensing using wireless communication signals has garnered significant attention due to its non-intrusive nature and ubiquitous infrastructure. Despite the promise, the inherent bistatic deployment of wireless communication…

The Sixth Generation (6G) of mobile networks is expected to use carrier frequencies in the spectrum above 100 GHz, to satisfy the demands for higher data rates and bandwidth of future digital applications. The development of networking…

Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. Implementing this paradigm for radar sensing, this work…

The IEEE 802.11p is the technology dedicated to vehicular communications to support road safety, efficiency, and comfort applications. A large number of research activities have been carried out to study the characteristics of the IEEE…

In this paper, we analyze the coexistence of a primary and a secondary (cognitive) network when both networks use the IEEE 802.11 based distributed coordination function for medium access control. Specifically, we consider the problem of…

High speed wireless access on 60 GHz spectrum relies on high-gain directional antennas to overcome the severe signal attenuation. However, perfect alignment between transmitting and receiving antenna beams is rare in practice and overheard…

Many communication systems involve high bandwidth, while sparse, radio frequency (RF) signals. Working with high frequency signals requires appropriate system-level components such as high-speed analog-to-digital converters (ADC). In…

Fluid antenna system (FAS) has recently surfaced as a promising technology for the upcoming sixth generation (6G) wireless networks. Unlike traditional antenna system (TAS) with fixed antenna location, FAS introduces a flexible component in…