Related papers: Sub-Nyquist Channel Estimation over IEEE 802.11ad …
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system capable of near gigabit data rate has been developed at IETR. The realized system covers 2 GHz available bandwidth. This paper describes the design and realization of the…
Beam training of 802.11 ad is a technology that helps accelerate the analog weighting vector (AWV) selection process under the constraint of the existing code-book for AWV. However, 5G milli-meter wave (mmWave)…
Rydberg microwave (MW) sensors are superior to conventional antenna-based techniques because of their wide operating frequency range and outstanding potential sensitivity. Here, we demonstrate a Rydberg microwave receiver with a high…
Spectrum sensing is a fundamental component in cognitive radio. A major challenge in this area is the requirement of a high sampling rate in the sensing of a wideband signal. In this paper a wideband spectrum sensing model is presented that…
In this work we design a receiver that iteratively passes soft information between the channel estimation and data decoding stages. The receiver incorporates sparsity-based parametric channel estimation. State-of-the-art sparsity-based…
We develop sub-Nyquist sampling systems for analog signals comprised of several, possibly overlapping, finite duration pulses with unknown shapes and time positions. Efficient sampling schemes when either the pulse shape or the locations of…
We investigate design and performance of communications over the bandlimited Gaussian channel with one-bit output quantization. A transceiver structure is proposed, which generates the channel input using a finite set of time-limited and…
Millimeter-wave (mm-Wave) cellular systems are a promising option for a very high data rate communication because of the large bandwidth available at mm-Wave frequencies. Due to the large path-loss exponent in the mm-Wave range of the…
Millimetre-wave (mmWave) technology is a promising candidate for meeting the intensifying demand for ultra fast wireless connectivity, especially in high-end enterprise networks. Very narrow beam forming is mandatory to mitigate the severe…
LoRa is one of the most widely used low-power wide-area network technology for the Internet of Things. To achieve long-range communication with low power consumption at a low cost, LoRa uses a chirp spread spectrum modulation and transmits…
In this paper, we address the problem of reconstructing multiband signals from modulo-folded, pointwise samples within the Unlimited Sensing Framework (USF). Focusing on a low-complexity, single-channel acquisition setup, we establish…
We have implemented interference alignment (IA) and joint transmission coordinated multipoint (CoMP) on a wireless testbed using the feedback compression scheme of the new 802.11ac standard. The performance as a function of the frequency…
A study of channel hardening in a large-scale antenna system has been carried out by means of indoor channel measurements over four frequency bands, namely 1.472 GHz, 2.6 GHz, 3.82 GHz and 4.16 GHz. NTNU's Reconfigurable Radio Network…
The problem of sampling a discrete-time sequence of spatially bandlimited fields with a bounded dynamic range, in a distributed, communication-constrained, processing environment is addressed. A central unit, having access to the data…
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system is developed at IETR. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fibre (RoF) link is used to ensure the communications in…
In the sixth-generation (6G), with the further expansion of array element number and frequency bands, the wireless communications are expected to operate in the near-field region. The near-field radio communications (NFRC) will become…
Communication at high carrier frequencies such as millimeter wave (mmWave) and terahertz (THz) requires channel estimation for very large bandwidths at low SNR. Hence, allocating an orthogonal pilot tone for each coherence bandwidth leads…
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to…
The WiFi landscape is rapidly changing over the last years, responding to the new needs of wireless communications. IEEE 802.11ax is the next fast-approaching standard, addressing some of today's biggest performance challenges specifically…
Advances of information-theoretic understanding of sparse sampling of continuous uncoded signals at sampling rates exceeding the Landau rate were reported in recent works. This work examines sparse sampling of coded signals at sub-Landau…