Related papers: Tunnel-injected sub-260 nm ultraviolet light emitt…
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and…
We discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that capacitance-voltage measurements can be used to…
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient…
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into…
Polarization engineered interband tunnel junctions (TJs) are integrated in nanowire ultraviolet (UV) light emitting diodes (LEDs). A ~6V reduction in turn-on voltage is achieved by the integration of tunnel junction at the base of…
InGaN/GaN tunnel junction contacts were grown on top of an InGaN/GaN blue (450 nm) light emitting diode wafer using plasma assisted molecular beam epitaxy. The tunnel junction contacts enable low spreading resistance n-GaN top contact layer…
Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED…
Enhanced interband tunnel injection of holes into a PN junction is demonstrated using P-GaN/InGaN/N-GaN tunnel junctions with a specific resistivity of 1.2 X 10-4 {\Omega} cm2. The design methodology and low-temperature characteristic of…
The efficiency of ultra violet LEDs is critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling-based top-contacts to realize…
Deep ultraviolet (UV) optical emission below 250 nm (~5 eV) in semiconductors is traditionally obtained from high aluminum containing AlGaN alloy quantum wells. It is shown here that high-quality epitaxial ultrathin binary GaN quantum disks…
We report on the design and demonstration of polarization-engineered GaN/InGaN/GaN tunnel junction diodes with high current density and low tunneling turn-on voltage. Wentzel-Kramers-Brillouin (WKB) calculations were used to model and…
We report on ultra-wide bandgap (UWBG) Al0.75Ga0.25N channel metal-insulator-semiconductor field-effect transistors (MISFET) with heterostructure engineered low-resistance ohmic contacts. The low intrinsic electron affinity of AlN (0.6 eV)…
We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results…
Electrically injected deep ultra-violet (UV) emission is obtained using monolayer (ML) thin GaN/AlN quantum structures as active regions. The emission wavelength is tuned by controlling the thickness of ultrathin GaN layers with monolayer…
The large electronic polarization in III-V nitrides allow for novel physics not possible in other semiconductor families. In this work, interband Zener tunneling in wide-bandgap GaN heterojunctions is demonstrated by using…
We show that GdN nanoislands can enhance inter-band tunneling in GaN PN junctions by several orders of magnitude, enabling low optical absorption low-resistance tunnel junctions (specific resistivity 1.3 X 10-3 {\Omega}-cm2) for various…
Blue light-emitting diodes (LEDs) consisting of a buried n+-p+ GaN tunnel junction, (In,Ga)N multiple quantum wells (MQWs) and a n+-GaN top layer are grown on single-crystal Ga-polar n+-GaN bulk wafers by plasma-assisted molecular beam…
Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here,…