Related papers: 1.5 $\mu$m lasers with sub 10 mHz linewidth
Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekeeping, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities,…
The phase coherence of an ultrastable optical frequency reference is fully maintained over actively stabilized fiber networks of lengths exceeding 30 km. For a 7-km link installed in an urban environment, the transfer instability is $6…
Photonic integration offers the potential to bring complex high-performance optical systems to the form factor of a compact semiconductor chip. However, the range of system functions accessible critically depends on the extent to which…
We characterize the frequency-sensitivity of a cavity-stabilized laser to inertial forces and temperature fluctuations, and perform real-time feed-forward to correct for these sources of noise. We measure the sensitivity of the cavity to…
Two-color lasers with high coherence are paramount in precision measurement, accurate light-matter interaction, and low-noise photonic microwave generation. However, conventional two-color lasers often suffer from low coherence,…
Precision applications including quantum computing and sensing, mmWave/RF generation, and metrology, demand widely tunable, ultra-low phase noise lasers. Today, these experiments employ table-scale systems with bulk-optics and isolators to…
We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
We demonstrate two-stage laser stabilization based on a combination of Fabry- Perot and spectral-hole burning techniques. The laser is first pre-stabilized by the Fabry-Perot cavity to a fractional-frequency stability of sigma_y(tau) <…
We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an…
We utilize a high quality calcium fluoride whispering-gallery-mode resonator to stabilize a simple erbium doped fiber ring laser with an emission frequency of 196 THz (wavelenght 1530 nm) to a linewidth below 650 Hz. This corresponds to a…
We demonstrate a micro-Fabry-P\'erot cavity array through laser etching of high-surface-quality mirrors onto a single fused silica substrate. A cavity finesse of $4750\pm 200$ was achieved with a simple array design with $500~\mu m$ cavity…
Highly frequency-stable lasers are a ubiquitous tool for optical frequency metrology, precision interferometry, and quantum information science. While making a universally applicable laser is unrealistic, spectral noise can be tailored for…
Narrow-linewidth lasers are vital for a broad range of scientific and technological applications, including atomic clocks and precision sensing. Achieving high frequency stability is often as critical as ensuring scalability, portability,…
We report on the relative length fluctuation of two fixed-spacer Fabry-Perot cavities with mirrors fabricated from silica/tantala dielectric coatings on fused silica substrates. By locking a laser to each cavity and reading out the beat…
The distribution of ultra-narrow linewidth laser radiation is an integral part of many challenging metrological applications. Changes in the optical pathlength induced by environmental disturbances compromise the stability and accuracy of…
We report in detail the design process and performance of an auto-locking ultra-stable laser with sub-hertz linewidth at the first time. The laser frequency is automatically stabilized to an optical reference cavity with a home-made…
Cryogenic ultra-stable lasers have extremely low thermal noise limits and frequency drifts, but they are more seriously affected by vibration noise from cryostats. Main material candidates for cryogenic ultra-stable cavities include silicon…
We frequency stabilize the output of a miniature stimulated Brillouin scattering (SBS) laser to rubidium atoms in a microfabricated cell to realize a laser system with frequency stability at the $10^{-11}$ level over seven decades in…
We present a Nd:YAG ultra-stable laser system operating at 946 nm and demonstrate a fractional frequency instability of $1.1\times10^{-16}$ at 1 s by pre-stabilizing it to a 30 cm-long ULE cavity at room temperature. All key analog…