Related papers: Tuning friction with composite hierarchical surfac…
The effect of self-affine roughness on solid contact is examined with molecular dynamics and continuum calculations. The contact area and normal and lateral stiffnesses rise linearly with the applied load, and the load rises exponentially…
We generalize the Persson contact mechanics and rubber friction theory to the case where both surfaces have surface roughness. The solids can be rigid, elastic or viscoelastic, and can be homogeneous or layered. We calculate the contact…
Honeycomb-like microstructures have been shown to exhibit local elastic buckling under compression, with three possible geometric buckling modes, or pattern transformations. The individual pattern transformations, and consequently also…
Theoretical work has shed light on the phase behavior of idealized mixtures of many components with random interactions. But typical mixtures interact through particular physical features, leading to a structured, non-random interaction…
In rubber friction studies it is often observed that the kinetic friction coefficient {\mu} depends on the nominal contact pressure p. We discuss several possible origins of the pressure dependency of {\mu}: (a) saturation of the contact…
Amorphous materials of homogeneous structures usually suffer from nonuniform deformation under shear, which can develop into shear localization and eventually destructive shear band. One approach to tackle this issue is to introduce an…
Thin surfaces are ubiquitous in nature, from leaves to cell membranes, and in technology, from paper to corrugated containers. Structural thinness imbues them with flexibility, the ability to easily bend under light loads, even as their…
A reduced order asymptotic homogenization based multiscale technique which can capture damage and inelastic effects in composite materials is proposed. This technique is based on two scale homogenization procedure where eigen strain…
Sliding along frictional interfaces separating dissimilar elastic materials is qualitatively different from sliding along interfaces separating identical materials due to the existence of an elastodynamic coupling between interfacial slip…
The modes of attachments, detachments and relaxations of molecules of rubbers and gels on solid surfaces are keys to understanding their frictional properties. An early stochastic model of polymer relaxations on surfaces was given by…
Harmonic surface deformation is a well-known geometric modeling method that creates plausible deformations in an interactive manner. However, this method is susceptible to artifacts, in particular close to the deformation handles. These…
The use of electrophoretic forces to tune friction at material-nanoparticle-liquid interfaces with static or low frequency (0.6-50 mHz) electric fields is reported for the first time. External electric fields were employed to reposition…
Soft composite solids are made of inclusions dispersed within soft matrices. They are ubiquitous in nature and form the basis of many biological tissues. In the field of materials science, synthetic soft composites are promising candidates…
The macroscopic friction of particulate materials often weakens as the flow rate is increased, leading to potentially disastrous intermittent phenomena including earthquakes and landslides. We theoretically and numerically study this…
Granular materials such as sand, powders, and food grains are ubiquitous in civil engineering, geoscience, agriculture, and medicine. While the influence of friction between the grains on the static structure of these systems is well…
The increase of sliding friction upon increasing load is a classic in the macroscopic world. Here we discuss the possibility that friction rise might sometimes turn into a drop when, at the mesoscale and nanoscale, a confined lubricant film…
Sliding friction across a thin soft lubricant film typically occurs by stick-slip, the lubricant fully solidifying at stick, yielding and flowing at slip. The static friction force per unit area preceding slip is known from molecular…
Solid friction between two rough surfaces is often observed to increase logarithmically over time due to contact creeping. An intriguing question is whether a similar aging effect occurs in contact line (CL) friction over rough substrates.…
Simulations of the kinetic friction due to a layer of adsorbed molecules between two crystalline surfaces are presented. The adsorbed layer naturally produces friction that is consistent with Amontons' laws and insensitive to parameters…
Colloidal 2D monolayers sliding in an optical lattice are of recent importance as a frictional system. In the general case when the monolayer and optical lattices are incommensurate, we predict two important novelties, one in the static…