Related papers: Resonant Frequency Control For the PIP-II Injector…
As part of the PIP-II project at Fermilab, a pre-production cryomodule featuring 325 MHz Single Spoke Resonator type 2 (SSR2) superconducting RF cavities is under construction. These SSR2 cavities are fabricated by industry partners and…
Field emission (FE) remains a significant hurdle for achieving optimal performance and reliability in super-conducting radiofrequency (SRF) cavities used in accelerator cryomodules. A thorough understanding of the generation and propagation…
We present a versatile rf pulse control system that has been designed for multi-qubit quantum experiments. One instrument can be scaled to provide 32 channels of rf between 10 - 450 MHz. Synchronization can be achieved across multiple…
A superconducting RF accelerator test facility is currently under construction at Fermilab. The accelerator will consist of an electron gun, 40 MeV injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, and…
High-fidelity control of superconducting qubits requires the generation of microwave-frequency pulses precisely tailored on nanosecond timescales. These pulses are most commonly synthesized by up-converting and superimposing two narrow-band…
The phase averaging reference line system provides the RF phase reference, LO and clock signals to the LLRF and other accelerator sub-systems. The PIP-II linac has RF systems at three frequencies - 162.5 MHz, 325 MHz and 650 MHz. A…
In advanced tokamak scenarios, active feedback control of unstable resistive wall modes (RWM) may be required. A RWM is an instability due to plasma kink at higher plasma pressure, moderated by the presence of a resistive wall surrounding…
Optical microresonators are characterized by a comb of resonances that preserve similar characteristics over a broad spectral interval. However, for many applications it is beneficial to selectively control of the quality factor (Q) of one…
Plasma impedance probes (PIPs) are a type of RF probe that primarily measure electron density. This work introduces two advancements: a streamlined analytical model for interpreting PIP-monopole measurements and techniques for achieving…
This paper presents the final physics design of the Proton Improvement Plan-II (PIP-II) at Fermilab, focusing on the linear accelerator (Linac) and its beam transfer line. We address the challenges in longitudinal and transverse lattice…
The LCLS-II HE superconducting linac can produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation…
A new approach to the longitudinal vane modulation profile in a Radio Frequency Quadrupole (RFQ) has been discovered that significantly improves bunching and longitudinal emittance control. This procedure has been successfully tested in…
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The…
The RFQ of the project IPHI is a 8 meter long, high power, very precise tolerances (0.01 mm on 1 meter long for example) device to accelerate protons. This RFQ is similar to the RFQ of the LEDA project. So, we realize a thermal and…
The cavities in superconducting linacs tend to operate with narrow bandwidths that are comparable to microphonic induced detuning from external forces. Proportional-Integral (PI) feedback loops are used to stabilize the cavity voltage in…
The Proton Improvement Plan - II (PIP-II) is a new linear accelerator (LINAC) complex being built at Fermilab. It is based on superconducting radiofrequency cavities and will accelerate H- ions to 800 MeV kinetic energy before injection…
A compact adjustable focusing system for a 2 MeV H- RFQ Linac is designed, constructed and tested based on four permanent magnet quadrupoles (PMQ). A PMQ model is realised using finite element simulations, providing an integrated field…
Modern fourth-generation storage ring light sources predominantly utilize digital I/Q-based proportional-integral (PI) feedback for their radio-frequency (RF) systems. This paper introduces a dedicated PI feedback model implemented in the…
This paper introduces a new method to control resonance frequency and output power of induction heating coil. Induction heating coil can be controlled by single phase sinusoidal pulse width modulation (SPWM) inverter .All electrical…
The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC…