Related papers: Enhancing thermal stability of solution-processed …
Demand for low-noise, continuous-wave, frequency-tunable lasers based on semiconductor integrated photonics has been advancing in support of numerous applications. In particular, an important goal is to achieve narrow spectral linewidth,…
Photovoltaic (PV) response of epitaxial BiFe0.95Mn0.05O3 thin film grown by pulsed laser deposition has been investigated on a broad range of temperature. Wavelength dependent photovoltaic effect shows the contribution of in gap level…
Entropy stabilization has garnered significant attention as a new approach to designing novel materials. Much of the work in this area has focused on bulk ceramic processing, leaving entropy-stabilized thin films relatively underexplored.…
Solid state electronics relies on the intentional introduction of impurity atoms or dopants into a semiconductor crystal and/or the formation of junctions between different materials (heterojunctions) to create rectifiers, potential…
The linear stability analysis of an optically thin plasma where a general reaction proceeds, including chemical relaxation time effects, is carried out . A fifth order dispersion equation (instead of the fourth order one resulting when such…
Silicon films doped with Er and O were prepared by techniques of physical vapor deposition on crystalline silicon, ion beam mixing and oxygen incorporation through Ar+ and O2+ implantation, and thermal annealing. Processing steps were…
Epitaxial 200nm BiFe$_{0.95}$Mn$_{0.05}$O$_{3}$ (BFO) film was grown by pulsed laser deposition on (111) oriented SrTiO3 substrate buffered with a 50nm thick SrRuO$_{3}$ electrode. The BFO thin film shows a rhombohedral structure and a…
The requirement for low operational voltage in electrowetting devices, met using thin dielectrics, is usually connected with serious material failure issues. Dielectric breakdown (visible as electrolysis) is frequently evident slightly…
Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its…
Single-junction photovoltaic cells are considered to be efficient solar energy converters, but even ideal cells cannot exceed the their fundamental thermodynamic efficiency limit, first analysed by Shockley and Queisser (SQ). For moderated…
We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here,…
Thermal radiative energy transport is essential for high-temperature energy harvesting technologies, including thermophotovoltaics (TPVs) and grid-scale thermal energy storage. However, the inherently low emissivity of conventional…
Dense and mesoporous 4% mol Yttria-stabilized zirconia thin films were deposited on amorphous silica substrates. The effects of the temperature on the mesostructure were analyzed, by applying different thermal treatments to the samples…
We present a pipeline to study the device performance of organic solar cells in silico. We introduce a mathematical model that includes the dynamics of excitons as well as their dissociation at bulk heterojunctions within the nanomorphology…
We present an experimental demonstration of passive, dynamic thermal regulation in a solid-state system with temperature-dependent thermal emissivity switching. We achieve this effect using a multilayered device, comprised of a vanadium…
The gain of silicon photomultipliers (SiPMs) increases with bias voltage and decreases with temperature. To operate SiPMs at stable gain, the bias voltage can be adjusted to compensate temperature changes. We have tested this concept with…
Metal oxide thin-film transistors are fast becoming a ubiquitous technology for application in driving backplanes of organic light-emitting diode displays. Currently all commercial products rely on metal oxides processed via physical vapor…
In this work, the thermo-optic coefficient (TOC) of the silicon-rich amorphous silicon carbide (a-SiC) thin film deposited by plasma-enhanced chemical vapor deposition is characterized. We found that the TOC of the film increases as its…
High quality optical thin film materials form a basis for on-chip photonic micro- and nano-devices, where several photonic elements form an optical circuit. Their realization generally requires the thin film to have a higher refractive…
Tin Sulphide is a layered compound which retains its structure when deposited as thin films by thermal evaporation. The films were found to have oriented growth with the direction of orientation changing with film thickness. The film's…