Related papers: Magnetoresistance and surface roughness study of e…
The giant magnetoresistance (GMR) effect has been widely investigated on electrodeposited ferromagnetic/non-magnetic (FM/NM) multilayers generally containing a large number of bilayers. In most applications of the GMR effect, layered…
A detailed study of the evolution of the magnetoresistance was performed on electrodeposited Co/Cu multilayers with Cu layer thicknesses ranging from 0.5 nm to 4.5 nm. For thin Cu layers (up to 1.5 nm), anisotropic magnetoresistance (AMR)…
No systematic studies have been carried out on the giant magnetoresistance (GMR) of electrodeposited (ED) Fe-Co/Cu multilayers since the elaboration of a method for the optimization of the Cu layer deposition potential. In this paper, we…
The giant magnetoresistance (GMR) and structure was investigated for electrodeposited Co/Cu multilayers prepared by a conventional galvanostatic/potentiostatic pulse combination from a pure sulfate electrolyte with various layer…
It has been shown previously for electrodeposited Co/Cu multilayers that the single-bath electrodeposition process can be optimized from an electrochemical point of view in order to avoid unwanted Co dissolution and incorporation of Co in…
The giant magnetoresistance (GMR) was investigated for electrodeposited Co/Cu multilayers. In order to better understand the formation of individual layers and their influence on GMR, multilayers produced by two different deposition…
A series of Co_xCu_{100-x} (x = 0, 40...75, 100) layers with thicknesses in-between 13 nm and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle X-ray diffraction (WAXRD), transmission electron…
We report an interesting magnetic behavior of a Co film (thickness ~ 350 {\AA}) grown on Si/Ti/Cu buffer layer by electro-deposition (ED) technique. Using depth sensitive X-ray reflectivity and polarized neutron reflectivity (PNR) we…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Ti/Cu multilayers with periods ranging from 4 to 52.5 nm were synthesized by magnetron sputtering to examine how the period thickness affects morphology, crystallization, texture development, and preservation of periodicity. The structural…
We investigate the correlation between roughness, remanence and coercivity in Co/Ni films grown on Cu seed layers of varying thickness. Increasing the Cu seed layer thickness of Ta/Cu/8x[Co/Ni] thin films increases the roughness of the…
Cuprous oxide (Cu2O) films from 25 nm to 1500 nm were electrodeposited on n-Si(100) and Ni/n-Si(100) substrates from aqueous solution at room temperature. X-ray diffraction and transmission electron microscopy imaging show that the Cu2O…
Ni/Cu(001) is known as a unique system showing the spin-reorientation transition from an in-plane to out-of-plane magnetization direction when the Ni-overlayer thickness is increased. We investigate different relaxed multilayer structures…
The magnetic properties and magnetization dynamics of polycrystalline ultra-thin Co layers were investigated using a broadband ferromagnetic resonance (FMR) technique at room temperature. A variable thickness (1 nm $\leq t \leq$ 10 nm) Co…
We investigate the spin transport and ferromagnetic resonance properties of giant magnetoresistive (GMR) Co/Cu-Ni multilayers with variable levels of Ni doping in the Cu spacer. We present an experimental evidence for a…
This study investigates the giant magneto-thermal resistance (GMTR) effect in a fully-bcc epitaxial Co50Fe50/Cu multilayer through both experimental and theoretical approaches. The applied magnetic field results in a giant change of the…
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…
. We focused on the interaction between two ferromagnetic cobalt layers through a non-magnetic titanium layer. The magnetic properties of the structure were characterized by ferromagnetic resonance technique (FMR). The data were collected…
The properties of the archetypal Co/Cu giant magnetoresistance (GMR) spin-valve structure have been modified by the insertion of very thin (sub-monolayer) $\delta$-layers of various elements at different points within the Co layers, and at…
We report an investigation of the structural and electronic properties of hybrid superconductor/ferromagnet (S/F) bilayers of composition Nb/Cu$_{60}$Ni$_{40}$ prepared by magnetron sputtering. X-ray and neutron reflectometry show that both…