Related papers: Design of P-Type Cladding Layers for Tunnel-Inject…
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and…
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into…
We report on tunnel-injected deep ultraviolet light emitting diodes (UV LEDs) configured with a polarization engineered Al0.75Ga0.25N/ In0.2Ga0.8N tunnel junction structure. Tunnel-injected UV LED structure enables n-type contacts for both…
Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were…
As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED…
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient…
The efficiency of ultra violet LEDs is critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling-based top-contacts to realize…
Polarization engineered interband tunnel junctions (TJs) are integrated in nanowire ultraviolet (UV) light emitting diodes (LEDs). A ~6V reduction in turn-on voltage is achieved by the integration of tunnel junction at the base of…
The undoped BAlN electron-blocking layer (EBL) is investigated to replace the conventional AlGaN EBL in light-emitting diodes (LEDs). Numerical studies of the impact of variously doped EBLs on the output characteristics of LEDs demonstrate…
Enhanced interband tunnel injection of holes into a PN junction is demonstrated using P-GaN/InGaN/N-GaN tunnel junctions with a specific resistivity of 1.2 X 10-4 {\Omega} cm2. The design methodology and low-temperature characteristic of…
Polarisation doping of Al$_x$Ga$_{1-x}$N, through grading of $x$, has realised major improvements in $p$-type conductivity in ultraviolet (UV) light-emitting diodes (LEDs) compared to conventional impurity doping. However, the exact balance…
Transitioning to solid-state ultraviolet (UV) lighting is critical for reducing global energy utilization to meet net-zero targets. AlGaN-based far-UVC LEDs offer a mercury-free, energy-efficient alternative to conventional mercury lamps,…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
Ultrawide bandgap heterojunction p-n diodes with polarization-induced AlGaN p-type layers are demonstrated using plasma-assisted molecular beam epitaxy on bulk AlN substrates. Current-voltage characteristics show a turn on voltage of…
Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here,…
We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results…
Deep ultraviolet (UV) optical emission below 250 nm (~5 eV) in semiconductors is traditionally obtained from high aluminum containing AlGaN alloy quantum wells. It is shown here that high-quality epitaxial ultrathin binary GaN quantum disks…
Record wall-plug efficiencies in long-wavelength, III-nitride light-emitting diodes (LEDs) have recently been achieved through improvements in electrical efficiency in devices containing V-defects. Numerical modeling suggests this may be…
We present a hybrid light-emitting diode structure composed of an n-type gallium nitride nanowire on a p-type silicon substrate in which current is injected along the length of the nanowire. The device emits ultraviolet light under both…
Ultra-wide bandgap (UWBG) materials hold immense potential for high-power RF electronics and deep ultraviolet photonics. Among these, AlGaN emerges as a promising candidate, offering a tunable bandgap from 3.4 eV (GaN) to 6.1 eV (AlN) and…