Related papers: Reactive magnetron sputter deposition of supercond…
We present our current progress on the design and test of Ti/TiN Multilayer for use in Kinetic Inductance Detectors (KIDs). Sensors based on sub-stoichiometric TiN film are commonly used in several applications. However, it is difficult to…
We report on the study of phonon properties and electron-phonon coupling in thin NbTiN films, which are intensively exploited in superconducting devices. Studied NbTiN films with thicknesses less than 10~nm are disordered with respect to…
We experimentally investigated the detection performance of highly disordered NbxTi1-xN based superconducting nanowire single photon detectors (SNSPDs). The dependence on the composition of the transition temperature Tc for NbxTi1-xN films…
We investigate thin film resistive thermometry based on metal-to-insulator-transition (niobium nitride) materials down to very low temperature. The variation of the NbN thermometer resistance have been calibrated versus temperature and…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
Titanium nitride (TiN) presents superior electrical conductivity with mechanical and chemical stability and compatibility with the semiconductor fabrication process. Here, we fabricated epitaxial and polycrystalline TiN (111) thin films on…
Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…
The sensitive element of superconducting single-photon detectors made in the form of a microstrip promise to resolve significant limitations caused by their typical design. However, attention should be paid to the problem of deterioration…
We report on the charge carrier dynamics of superconducting titanium nitride (TiN) in the frequency range 90 - 510 GHz (3 - 17 cm-1). The experiments were perfomed on a 18 nm thick TiN film with a critical temperature of 3.4 K. Measurements…
We investigate electron transport and phase-breaking processes in thin titanium nitride (TiN) films of epitaxial quality. Previous studies show that a minute surface magnetic disorder significantly reduces the critical temperature…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging…
We apply the superconducting proximity effect in TiN/Ti multi-layer films to tune the critical temperature, Tc, to within 10 mK with high uniformity (less than 15 mK spread) across a 75 mm wafer. Reproducible Tc's are obtained from 0.8 -…
Disorder induced phase slip (PS) events appearing in the current voltage characteristics (IVCs) are reported for two-dimensional TiN thin films produced by a robust substrate mediated nitridation technique. Here, high temperature annealing…
Recently was reported a novel compound between rhenium and nitrogen, announced with ReN2 composition. This compound was synthesized by the high temperature and high pressure method. We found that the diffraction peaks of this compound are…
We report the reduction in residual stress of AlN thin films and also the crystal structure, surface morphology and nanomechanical properties of magnetron sputtered as a function of substrate temperature (Ts, 35 - 600 ?C). The residual…
Niobium Titanium nitride (NbTiN) based superconducting nanowire single photon detectors (SNSPDs) are known for their high performance across a wide spectral range, from the X-ray to the mid-infrared. Nonetheless, fabrication challenges and…
Kapton HN films, adopted worldwide due to their superior thermal durability (up to 400 {\deg}C), allow the high temperature sintering of nanoparticle based metal inks. By carefully selecting inks and Kapton substrates, outstanding thermal…
Samples were examined using a superconducting (Nb) neutron imaging system employing a delay-line technique which in previous studies was shown to have high spatial resolution. We found excellent correspondence between neutron transmission…