Related papers: Micromachining structured optical fibers using foc…
We report on the Raman and photoluminescence characterization of three-dimensional microstructures created in single crystal diamond with a Focused Ion Beam (FIB) assisted lift-off technique. The method is based on MeV ion implantation to…
We present a method for the production of segmented optics. It is a novel processing developed at INAF-Osservatorio Astronomico di Brera (INAF-OAB) employing commercial of-the-shelf materials. It is based on the shaping of thin glass foils…
Focused ion beam (FIB)-scanning electron microscopy (SEM) allowed the characterization of the microstructure of two solid oxide fuel cells prepared at different sintering temperatures. 3D volume reconstruction showed that a relatively low…
We present a simple lithographic method for fabrication of microresonator devices at the optical fiber surface. First, we undress the predetermined surface areas of a fiber segment from the polymer coating with a focused CO2 laser beam.…
We experimentally demonstrate interferometer-type guiding structures for neutral atoms based on dipole potentials created by micro-fabricated optical systems. As a central element we use an array of atom waveguides being formed by focusing…
Optical devices based on photonic crystals such as waveguides, lenses and beam-shapers, have received considerable theoretical and experimental attention in recent years. The production of these devices has been facilitated by the wide…
In this study, rigorous numerical calculation was utilized to characterize the focal properties of mid-infrared silicon microlens with the size about tens of micrometers. It is found that the focal shift phenomenon also exists in…
Integrated photonic devices have become pivotal elements across most research fields that involve light-based applications. A particularly versatile category of this technology are programmable photonic integrated processors, which are…
Integration of complex photonic structures onto optical fiber facets enables powerful platforms with unprecedented optical functionalities. Conventional nanofabrication technologies, however, do not permit viable integration of complex…
We consider photonic crystal fibers made from arbitrary base materials and derive a unified semi-analytical approach for the dispersion and modal properties which applies to the short-wavelength regime. In particular we calculate the…
Over the past two decades, photonics have been developed as technological solutions for astronomical instrumentation for, e.g., near-infrared spectroscopy and long baseline interferometry. With increasing instrument capabilities, large…
The use of a wire mesh facilitates creation of multiple optical traps for manipulation of small micron or sub-micron particles. Such an array of optical traps can be easily controlled. The trap that is formed in this manner is a continuous…
We have designed, fabricated and tested a micron-sized electron column with an overall length of about 700 microns comprising two electron lenses; a micro-lens with a minimal bore of 1 micron followed by a second lens with a bore of up to…
We demonstrate slot-mode optomechanical crystals, a class of device in which photonic and phononic crystal nanobeam resonators separated by a narrow slot are coupled through optomechanical interactions. In these geometries, nanobeam pairs…
Glass is increasingly desired as a material for manufacturing complex microscopic geometries, from the micro-optics in compact consumer products to microfluidic systems for chemical synthesis and biological analyses. As the size, geometric,…
We report on fabricating high-fill-factor plano-convex spherical and square micro-lens arrays on fused silica glass surface using CO2 laser assisted reshaping technique. Initially, periodic micro-pillars have been encoded on the glass…
Single-crystal nanoparticles of silicon, several tens of nm in diameter, may be suitable as building blocks for single-nanoparticle electronic devices. Previous studies of nanoparticles produced in low-pressure plasmas have demonstrated the…
Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instruments stability and sensitivity. In order to perform differential phase measurements at the H$\alpha$ line (656.3 nm)…
Secondary ion beams are beams of particles produced by bombarding a production target with a primary beam of a stable nuclide (in most cases protons) or by fragmentation of heavy primary particles. These methods are used for short lived,…
We use focused-ion-beam milling of a single-crystal Au surface to fabricate a 590-nm-long linear ridge that acts as a surface plasmon nanoresonator. Cathodoluminescence imaging spectroscopy is then used to excite and image surface plasmons…