Related papers: Optical Management Techniques for Organic Solar Ce…
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high…
A new strategy for eliminating photocurrent losses due to the metal contacts on the front of a solar cell was proposed, simulated, and tested. By placing triangular cross-section lines of low refractive index on top of the contacts,…
Luminescence solar concentrators act as semi-transparent photovoltaic cells and can be applied to large surface areas in modern urban environment. In this paper their optical efficiencies were analytically derived for different unit shapes…
A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the…
First multi-conjugate adaptive-optical (MCAO) systems are currently being installed on solar telescopes. The aim of these systems is to increase the corrected field-of-view with respect to conventional adaptive optics. However, this first…
Limited sensitivity and sensing range are arguably the greatest challenges in microwave sensor design. Recent attempts to improve these properties have relied on metamaterial- (MTM-) inspired open-loop resonators (OLRs) coupled to…
Nano-scaled dielectric and metallic structures are popular light tapping structures in thin-film solar cells. However, a large parasitic absorption in those structures is unavoidable. Most schemes based on such structures also involve the…
Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) system. For example, a back surface reflector (BSR) can improve the performance of TPV systems. A conventional metal BSR structure…
This paper presents a tunable liquid lens (TLL)-assisted indoor mobile visible light communication system. To mitigate performance degradation caused by user mobility and random receiver orientation, an electrowetting cuboid TLL is used at…
The great progress in organic photovoltaics (OPV) over the past few years has been largely achieved by the development of non-fullerene acceptors (NFAs), with power conversion efficiencies now approaching 20%. To further improve device…
Ultrathin solar cells reduce material usage and allow the use of lower-quality materials thanks to their one order of magnitude smaller thickness than their conventional counterparts. However, efficient photonic light-trapping is required…
Hydrogenated amorphous silicon alloy films are generally deposited by radio frequency plasma enhanced chemical vapor deposition (RF PECVD) technique on various types of substrates. Generally it is assumed that film quality remains unchanged…
Vision-based tactile sensors have been widely studied in the robotics field for high spatial resolution and compatibility with machine learning algorithms. However, the currently employed sensor's imaging system is bulky limiting its…
All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront shaping. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for…
In the last years, important non-linear optical results on sol-gel and polymeric materials have been reported, with values comparable to those found in crystals. These new materials contain push-pull chromophores either incorporated as…
Solution-processed amorphous silicon is a promising material for semiconductor devices. Unfortunately, its manufacturing leaves a high density of defects in the layer, which can be reduced by a treatment with hydrogen radicals. Here, we…
Visibly transparent luminescent solar concentrators (TLSCs) can optimize both power production and visible transparency by selectively harvesting the invisible portion of the solar spectrum. Since the primary applications of TLSCs include…
The Transfer Matrix Method (TMM) has become a prominent tool for the optical simulation of thin$-$film solar cells, particularly among researchers specializing in organic semiconductors and perovskite materials. As the commercial viability…
We report on the fabrication of two-dimensional periodic photonic nanostructures by nanoimprint lithography and dry etching, and their integration into a 1-{\mu}m-thin mono-crystalline silicon solar cell. Thanks to the periodic…
To improve the light extraction efficiency of organic light emitting diodes (OLEDs), we developed a novel substrate, i.e., a metamaterial based flat Moire micro-lens array formed using double nanoimprint, termed Mlens-array, consisting of a…