Related papers: Optical Management Techniques for Organic Solar Ce…
As we read this text, our eyes dynamically adjust the focal length to keep the line image in focus on the retina. Similarly, in many optics applications the focal length must be dynamically tunable. In the quest for compactness and…
mm-Wave communication systems use narrow directional beams due to the spectrum's characteristic nature: high path and penetration losses. The mobile and the base station primarily employ beams in line of sight (LoS) direction and when…
The inherently low photoluminescence (PL) yields in as prepared transition metal dichalcogenide (TMD) monolayers are broadly accepted to be the result of atomic vacancies (i.e. defects) and uncontrolled doping, which give rise to…
Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs)…
Irreproducibility is a serious issue in thin film organic photovoltaic (OPV) devices, as smallest local inhomogeneities can change the entire behaviour of identically built devices without showing obvious failure. Inhomogeneities can occur…
Recently, we have suggested dielectric metamaterial composed as an array of submicron dielectric spheres located on top of an amorphous thin-film solar cell. We have theoretically shown that this metamaterial can decrease the reflection and…
An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts.…
Optical and optoelectronic techniques for micro- and nano-object manipulation are becoming essential tools in nano- and bio-technology. A remarkable optoelectronic technique that has experimented a strong development in the last few years…
A detailed investigation of the functionality of inverted organic photovoltaics (OPVs) using bare Ag contacts as top electrode is presented. The inverted OPVs without hole transporting layer (HTL) exhibit a significant gain in hole carrier…
Solution-processed organic photovoltaics (OPV) have recently reached the target 10% power conversion efficiency expected to signal their viable commercialization as an inexpensive and scalable energy conversion technology. However,…
Computer generated holography requires high-speed spatial light modulators (SLMs) for dynamically patterning light in 3D. Piston-motion micromirror-based SLMs support high-speed ($\geq$ 10 kHz) phase modulation; however, fabricating…
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists,…
The increase of cell efficiency resulting from using a diffraction grating as a back reflector is investigated. An enhancement coefficient is introduced as a figure of merit that accounts for the ability of the rear grating to increase the…
Laser-enhanced contact optimization (LECO) has emerged as an important method for simultaneously reducing contact resistivity and metallization-induced recombination in advanced crystalline silicon solar cells, thereby enabling concurrent…
With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical limit, pushing conversion efficiencies even higher now relies on reducing every type of power loss that can occur within the device. Limiting…
Silica aerogels are nanoporous materials with exceptional optical and physical properties, making them promising candidates to enhance solar cell efficiency as antireflective coatings. This study synthesized hydrophobic silica aerogel thin…
Organometal trihalide perovskite solar cells have been rapidly developed and attracted much attention in recent years due to their high photoelectric conversion efficiency and low cost. Pulsed laser deposition (PLD) is a widely adopted…
High density and uniformity sub-100nm surface oxidized silicon nanocone forest structure is created and integrated onto the existing texturization microstructures on photovoltaic device surface by a one-step high throughput plasma enhanced…
We present a "one-step" approach to modify ZnO electron transport layers (ETLs) used in organic solar cells. This approach involves adding benzoic acid (BZA) derivatives directly to the ZnO precursor solution, which are then present at the…
We describe surface patterning strategies that permit high photon-collection efficiency together with high carrier-collection efficiency in an ultra-thin planar heterojunction organic photovoltaic cell. Optimized designs reach up to 50%…