Related papers: Optical Management Techniques for Organic Solar Ce…
Passivated, hole-selective contacts play important role in reducing surface recombination by lowering the concentration of electrons in the rear side of a solar cell. However, parasitic optical losses in these contacts can still limit the…
Nano-scaled metallic or dielectric structures may provide various ways to trap light into thin-film solar cells for improving the conversion efficiency. In most schemes, the textured active layers are involved into light trapping structures…
Thin film solar cells have been attractive for decades in advanced green technology platforms due to its possibilities to be integrated with buildings and on-chip applications. However, the bottleneck issues involved to consider the current…
Recently, liquid-phase crystallization of thin silicon films has emerged as a promising candidate for thin-film photovoltaics. On 10 \mu m thin absorbers, wafer-equivalent morphologies and open-circuit voltages were reached, leading to a…
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic…
Light trapping in solar cells allows for increased current and voltage, as well as reduced materials cost. It is known that in geometrical optics, a maximum 4n^2 absorption enhancement factor can be achieved by randomly texturing the…
We demonstrate the optical absorption has been enhanced in the small molecule organic solar cells by employing trapezoid grating structure. The enhanced absorption is mainly attributed to both waveguide modes and surface plasmon modes,…
We suggest a novel concept of efficient light-trapping structures for thin-film solar cells based on arrays of planar nanoantennas operating far from plasmonic resonances. The operation principle of our structures relies on the excitation…
The global need for clean water requires sustainable technology for purifying contaminated water. Highly efficient solar-driven photodegradation is a sustainable strategy for wastewater treatment. In this work, we demonstrate that the…
A design tool was formulated for optimizing the efficiency of inorganic, thin-film, photovoltaic solar cells. The solar cell can have multiple semiconductor layers in addition to antireflection coatings, passivation layers, and buffer…
Polymer based organic photovoltaic (OPV) technology offers a relatively inexpensive option for solar energy conversion provided its efficiency increases beyond the current level (6-7%) along with significant improvements in operational…
The use of eco-friendly materials for the environment has been addressed as a critical issue in the development of systems for renewable energy applications. In this regard, the investigation of organic photovoltaic (OPV) molecules for the…
We propose a light-trapping structure offering a significant enhancement of photovoltaic absorption in transparent organic solar cells operating at infrared while the visible light transmission keeps sufficiently high. The main mechanism of…
Fully-textured perovskite/silicon tandem solar cells have emerged as promising candidates for next-generation photovoltaics. The optical functions of full texturing, however, are not yet fully understood. A key challenge is the requirement…
We demonstrate that blending fluorinated molecules in PEDOT:PSS hole transport layers (HTL) induces charge transfers which impact on both charge extraction and photogeneration within organic photovoltaic (OPV) devices. OPVs fabricated with…
The performance of organic solar cells (OSCs) can be greatly improved by incorporating silica-coated gold nanorods (Au@SiO2 NRs) at the interface between the hole transporting layer and the active layer due to the plasmonic effect. The…
A methodology is proposed for finding structures that are, optically speaking, locally optimal : a physical analysis of much simpler structures is used to constrain the optimization process. The obtained designs are based on a flat…
After the efficiency of organic photovoltaic (OPV) cells achieved more than 10%, the control of stability and degradation mechanisms of solar cells became a prominent task. The improvement of device efficiency due to incorporation of a…
We demonstrate enhanced light extraction for monochrome top-emitting organic light-emitting diodes (OLEDs). The enhancement by a factor of 1.2 compared to a reference sample is caused by the use of a hole transport layer (HTL) material…
The future generation of telescopes will be equipped with multi-conjugate adaptive optics (MCAO) systems in order to obtain high angular resolution over large fields of view. MCAO comes in two flavors: star- and layer-oriented. Existing…