Related papers: Metallic coplanar resonators optimized for low-tem…
We present measurements of the temperature and power dependence of the resonance frequency and frequency noise of superconducting niobium thin-film coplanar waveguide resonators, carried out at temperatures well below the superconducting…
Dielectric measurements on insulating materials at cryogenic temperatures can be challenging, depending on the frequency and temperature ranges of interest. We present a technique to study the dielectric properties of bulk dielectrics at…
As superconducting kinetic inductance detectors (KIDs) continue to grow in popularity for sensitive submillimeter detection and other applications, there is a drive to advance toward lower-loss devices. We present measurements of diagnostic…
We have designed, fabricated and measured high-Q $\lambda/2$ coplanar waveguide microwave resonators whose resonance frequency is made tunable with magnetic field by inserting a DC-SQUID array (including 1 or 7 SQUIDs) inside. Their…
We performed transmission spectroscopy experiments on coplanar half wavelength niobium resonators at a temperature T=4.2 K. We observe not only a strong dependence of the quality factor Q and the resonance frequency f_res on an externally…
We present an improved nuclear refrigerator reaching 0.3 mK, aimed at microkelvin nanoelectronic experiments, and use it to investigate metallic Coulomb blockade thermometers (CBTs) with various resistances R. The high-R devices cool to…
Resonance properties of nanomechanical resonators based on doubly clamped silicon nanowires, fabricated from silicon-on-insulator and coated with a thin layer of aluminum, were experimentally investigated. Resonance frequencies of the…
We report on the design, fabrication and characterization of superconducting coplanar waveguide resonators with nanoscopic constrictions. By reducing the size of the center line down to 50 nm, the radio frequency currents are concentrated…
Characterizing superconducting microwave resonators with highly dissipative elements is a technical challenge, but a requirement for implementing and understanding the operation of hybrid quantum devices involving dissipative elements, e.g.…
This paper deals with a single-crystal-silicon (SCS) MEMS resonator with improved temperature stability. While simulations have shown that the temperature coefficient of resonant frequency can be down to 1 ppm/degrees C, preliminary…
We have designed, fabricated and characterized microwave resonators made out of thin films of granular aluminium (grAl) with different oxygen content. We extract the contribution of the large kinetic-inductance of this disordered…
Suspended monolayer transition metal-dichalcogenides (TMD) are membranes that combine ultra-low mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality…
We report on fabrication of a microtoroid resonator of high-quality (high-Q) factor integrated with an on-chip microheater. Both the microresonator and microheater are fabricated using femtosecond laser three-dimensional (3D)…
We have studied Nb lambda/2 coplanar-waveguide (CPW) resonators whose resonant frequencies are 10-11 GHz. The resonators have different film thicknesses, t=0.05, 0.1, 0.2, and 0.3 um. We measured at low temperatures, T=0.02-5 K, one of the…
Superconducting coplanar waveguide (SCPW) resonators have a wide range of applications due to the combination of their planar geometry and high quality factors relative to normal metals. However, their performance is sensitive to both the…
We present measurements of the dissipation and frequency shift in nanomechanical gold resonators at temperatures down to 10 mK. The resonators were fabricated as doubly-clamped beams above a GaAs substrate and actuated magnetomotively.…
Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the…
A split post dielectric resonator in a copper enclosure and a single post dielectric resonator in a cavity with superconducting end-plates have been constructed and used for the complex permittivity measurements of single crystal…
Single-crystal diamond is a promising material for MEMs devices because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has largely been limited by…
Mechanical resonators made with monolithic piezoelectric quartz crystals are promising for studying new physical phenomena. High mechanical quality factors ($Q$) exhibited by the mm-sized quartz resonators make them ideal for studying weak…