Related papers: Charge Distribution Dependency on Gap Thickness of…
This paper presents the approximate analytical solutions to the longitudinal space charge (LSC) impedances of a round beam with uniform transverse distribution and sinusoidal line density modulations under two boundary conditions: (a)…
To achieve high-resolution muography of compact targets in scenarios with complex logistical constraints, we are developing a portable muon detector system utilizing glass Resistive Plate Chambers (RPCs). Although RPCs are well understood…
The mitigation of human-induced climate change is of crucial importance for the sustainability of humankind. For this aim the RPC community has exerted considerable effort over the last decade to reduce the emission of greenhouse gases from…
Wire chambers are routinely operated as tracking detectors in magnetic spectrometers at high-intensity continuous electron beams. Especially in experiments studying reactions with small cross-sections the reaction yield is limited by the…
In this paper, an analytical predictive model of the negative capacitance (NC) effect in symmetric long channel double-gate junctionless transistor is proposed based on a charge-based model. In particular, we have investigated the effect of…
The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to…
We employ a particle-in-cell Monte Carlo collision/particle-particle particle-mesh (PIC-MCC/PPPM) simulation to study the plasma flow around and the charge distribution of a three-dimensional dust cluster in the sheath of a low-pressure rf…
The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. These same features, except for the low rate capability, were…
The detailed simulation of the Multi-gap Resistive Plate Chambers (MRPCs) provides the performance characteristics of MRPCs with different numbers of gas gaps and gap thicknesses. This helps in optimizing the structure of MRPCs under…
The dielectric response of complex materials is characterized, in many cases, by a similar power law frequency dependence of both the real and the imaginary parts of their complex dielectric constants. In the admittance representation, this…
The kinetic performance of graphite particles is difficult to deconvolute from half-cell experiments, where the influences of the working electrode porosity and the counter electrode contribute nonlinearly to the electrochemical re-sponse.…
A Pilot unit of a closed loop gas (CLS) mixing and distribution system for the INO project was designed and is being operated with (1.8 x 1.9) m^2 glass RPCs (Resistive Plate Chamber). The performance of an RPC depends on the quality and…
The specifics of charge screening and electrostatic potential spatial distribution in multilayered graphene films placed in between charged substrates is theoretically analyzed. It is shown that by varying the areal charge densities on the…
The use of gaseous Time Projection Chambers enables the detection and the detailed study of rare events due to particles interactions with the atoms of the gas with energy releases as low as a few keV. Due to this capability, these…
The muon spectrometer of the CMS (Compact Muon Solenoid) experiment at the Large Hadron Collider (LHC) is equipped with a redundant system made of Resistive Plate Chambers (RPCs) and Drift Tube (DT) chambers in the barrel, RPC and Cathode…
A micromechanical model at the microscale within a crystal plasticity self-consistent model, is used to analyse loading histories in Type 316H stainless steel, common to structural components in high-temperature power plants. The study…
A long term operation of Multi-Strip Multi-Gap Resistive Plate Chambers (MSMGRPC) with gas mixtures based on C2H2F4 and SF6 leads to aging effects, observed as depositions on the surface of the resistive electrodes. Moreover, enhanced…
We discuss results on the use of charge division to estimate the longitudinal position of charge deposition in silicon microstrip sensors, and on the intrinsic noise limitation of microstrip sensors in the limit of long, narrow strips. We…
Using charge accumulation imaging, we measure the charge flow across an incompressible strip and follow its evolution with magnetic field. The strip runs parallel to the edge of a gate deposited on the sample and forms at positions where an…
In this report we discuss static and time dependent electric fields in detector geometries with an arbitrary number of parallel layers of a given permittivity and weak conductivity. We derive the Green's functions i.e. the field of a point…